[2021] Use Valid New JN0-104 Test Notes & JN0-104 Valid Exam Guide
JN0-104 Actual Questions Answers PDF 100% Cover Real Exam Questions
NEW QUESTION 51
At which hierarchy would you configure a static MAC address for interface ge-0/0/0?
- A. [edit interfaces ge-0/0/0 unit 0 family inet address 172.25.11.2/24]
- B. [edit interfaces ge-0/0/0 unit 0 family inet]
- C. [edit interfaces ge-0/0/0 unit 0]
- D. [edit interfaces ge-0/0/0]
Answer: A
NEW QUESTION 52
Exhibit:
Which statement is correct when traffic is received from 10.10.10.4?
- A. The traffic is only rejected
- B. The traffic is counted and accepted
- C. The traffic is only accepted
- D. The traffic is counted and rejected
Answer: D
NEW QUESTION 53
Routing policies contain which two types of statements? (Choose two.)
- A. and
- B. from
- C. default
- D. then
Answer: B,D
NEW QUESTION 54
Which two statements describe IPv4 default behavior for BGP? Choose Two
- A. All BGP routes are imported into the inet4.0 routing table
- B. All Active BGP routes are exported to configured EBGP neighbors
- C. All BGP routes are imported into the inet.0 routing table
- D. All BGP routes are exported to configured EBGP neighbors
Answer: B,C
NEW QUESTION 55
Click the Exhibit button.
Referring to the exhibit, which action would synchronize the local router's clock with the NTP server?
- A. Configure the correct NTP trusted key using the net trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.
- B. Configure the NTP server using the set boot-server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
- C. Reboot the router.
- D. Issue the set date ntp operational command.
Answer: D
NEW QUESTION 56
Exhibit:
Which type of route does the configuration create?
- A. a non-advertised route
- B. a generated route
- C. an indirect next hop
- D. a default gateway
Answer: D
NEW QUESTION 57
Which keystroke is used to auto-complete user-defined variables?
- A. Home
- B. Tab
- C. Spacebar
- D. Esc
Answer: B
NEW QUESTION 58
You are considering to upgrade from 19.1R1 and want to ensure that only bug fixes are included.
Which two software versions should you use in the current situation? Choose Two
- A. 19.3R1-S1
- B. 19.1R1-S2
- C. 19.1R3
- D. 19.3R2
Answer: B,C
NEW QUESTION 59
You are attempting to upgrade the Junos OS on your device, but there is not enough space to complete the upgrade.
Which parameter, added to the request system software add command, would solve the problem?
- A. no-validate
- B. force
- C. no-copy
- D. validate
Answer: C
NEW QUESTION 60
What are two examples of transit traffic? (Choose two.)
- A. SFTP traffic that enters and exits the same interface on the local router.
- B. SCP traffic that is destined for the router's loopback interface.
- C. SFTP traffic that enters one interface and is destined for another interface on the local router
- D. SCP traffic that enters one interface and exits another interface on the local router.
Answer: B,C
NEW QUESTION 61
Referring to the exhibit, what will be the result?
- A. The device will boot into multi-user mode at the shell prompt.
- B. The device will boot in single-user mode at the operational prompt.
- C. The device will boot into single-user mode at the shell prompt.
- D. The device will boot in multi-user mode at the configuration prompt.
Answer: A
NEW QUESTION 62
A Junos device is in a factory-default configuration and no host name is set.
What is used in place of a host name in this scenario?
- A. router
- B. user
- C. amnesiac
- D. Junos
Answer: C
NEW QUESTION 63
Which command produced the output shown in the exhibit?
- A. Show interfaces extensive
- B. Show interfaces filters
- C. Show interfaces terse
- D. Show interfaces summary
Answer: C
NEW QUESTION 64
What happens when a route does not match any user-configured policies?
- A. The route is accepted.
- B. The route is rejected.
- C. The route is given a lower priority.
- D. The route is sent to the default policy.
Answer: D
NEW QUESTION 65
Your firewall filters are not in the correct order, what would solve this problem?
- A. Use the next-term action to force an evaluation of the next-term
- B. Use the reject action to change the action of the filter
- C. Use the commit parameter to ensure that terms are evaluated correctly
- D. Use the filter command to reorder the terms with the filter
Answer: D
NEW QUESTION 66
What is the default location of the syslog file on Junos devices?
- A. /var/tmp/
- B. /var/home/
- C. /var/log/
- D. /var/db/
Answer: C
NEW QUESTION 67
Referring to the exhibit.
Which command will cause this event message?
- A. request system recover
- B. request system commit
- C. request system logout
- D. request system halt
Answer: D
NEW QUESTION 68
In which directory the traceoption files stored by default?
- A. /var/tmp/
- B. /var/home/
- C. /var/log/
- D. /var/db/
Answer: C
NEW QUESTION 69
The monitor traffic command provides access to which utility?
- A. traceroute
- B. telnet
- C. netstat
- D. tcpdump
Answer: D
NEW QUESTION 70
Which key could you use to auto-complete a command in the Junos CLI?
- A. Right Arrow
- B. Ctrl+Z
- C. Spacebar
- D. Delete
Answer: C
NEW QUESTION 71
Which two keystrokes will auto-complete a command? (Choose two.)
- A. End
- B. Spacebar
- C. Tab
- D. Esc
Answer: B,C
NEW QUESTION 72
Exhibit:
Refer to exhibit, what will be the result?
- A. The device will boot in a multi-user mode at the configuration prompt
- B. The device will boot in a Single-user mode at the shell prompt
- C. The device will boot in a multi-user mode at the shell prompt
- D. The device will boot in a Single-user mode at the operational prompt
Answer: A
NEW QUESTION 73
Which two interfaces are considered physical interface? Choose TWO
- A. Et-7/1/4:0
- B. Xe-10/2/1
- C. Et-3/0/0:0.501
- D. Ge-0/0/0
Answer: B,D
NEW QUESTION 74
......
JN0-104 Exam questions and answers: https://www.actualvce.com/Juniper/JN0-104-valid-vce-dumps.html
Pass JN0-104 Exam Info and Free Practice Test : https://drive.google.com/open?id=1b6hKTFNPklUOVjl5-QYwEdGI5IYyG-Zs