2024 Latest 100% Exam Passing Ratio - HPE6-A73 Dumps PDF
Pass Exam With Full Sureness - HPE6-A73 Dumps with 124 Questions
NEW QUESTION # 42
An administrator creates an ACL rulewith both the "count" and "log';option enabled What is correct about the action takenby an AOS-CX switch when there is a match on this rule?
- A. The "count" and log" options are processed by the AOS-CX switcheshardware ASIC
- B. The total in the u\og" record and the count could contain different rule matching statistics
- C. By default a summarized log is created every minute with a count of the number of matches.
- D. Logging will not include certificate and TLS events but counting will
Answer: A
NEW QUESTION # 43
When implementing user-based tunneling on an AOS-CX switch, which component defines the primary and backup Aruba gateways?
- A. Server group
- B. Transit VLAN
- C. Gateway role
- D. Zone
Answer: D
NEW QUESTION # 44
A network administrator wants to replace older access layer switches with AOS-CX 6300 switches.
Which virtual switching technology can the administrator implement with this solution?
- A. Only VSX
- B. Only VSF
- C. Only Backplane stacking
- D. Both VSF and VSX
Answer: B
NEW QUESTION # 45
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. Only 802.1X authentication is configured on the port
- B. 802.1X authentication occurred and downloadable user roles are deployed
- C. 802.1X authentication was successful, but MAC authentication is yet to start
- D. A local user role was deployed using a ClearPass solution
Answer: B
NEW QUESTION # 46
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?
- A. Supports all AOS-CX switches
- B. Provides surge protection for PoE and non-PoE ports
- C. Provides up to 60W of power per port
- D. Requires NetEdit to implement
Answer: C
NEW QUESTION # 47
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?
- A. AOS-CX 6400
- B. AOS-CX 8325
- C. AOS-CX 8400
- D. AOS-CX 6300
Answer: A
NEW QUESTION # 48
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. 802.1X must be configured to work in fallback mode
- B. The client-limit setting for port access needs to be changed
- C. Device mode should be implemented
- D. Device fingerprinting is required for authentication
Answer: A
NEW QUESTION # 49
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- B. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- C. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: A
Explanation:
"both VSX switches as a PIM Designate Router (DR). One node is the actual DR, the other node is the proxy DR." "Only the actual DR performs multicast routing and forward traffic destined to groups to its downstream VLANs in the data-path." https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-7888/Content/Chp_Pre_tra_loss/ip-mul-rou-10.htm
NEW QUESTION # 50
A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. 802.1X, captive portal, and MAC-Auth
- B. Both 802.1X and MAC-Auth
- C. 802.1X only
- D. Both 802.1X and captive portal
Answer: C
NEW QUESTION # 51
What are best practices when implementing VSX on AOS-CX switches? (Choose two.)
- A. The keepalive connection should use a direct layer-3 connection.
- B. Timers should be left at their default values.
- C. The ISL lag should use the default MTU size.
- D. The default system MAC addresses should be used.
- E. The ISL lag should use at least 10GbE links or faster.
Answer: A,B
NEW QUESTION # 52
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI. The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Install the script's signature before installing the new script
- B. Remove a script that is no longer used before installing the new script
- C. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
- D. Enable trust settings for the AOS-CX switch's SSL certificate
Answer: B
NEW QUESTION # 53
An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Define the route type and metrics in the OSPF process
- B. Create a route map with the correct route type and metrics
- C. Create a classifier policy with the correct route type and metrics
- D. Define a class and policy map with the correct route type and metrics
Answer: B
NEW QUESTION # 54
A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. 802.1X, captive portal, and MAC-Auth
- B. 802.1X only
- C. Both 802.1X and captive portal
- D. Both 802.1X and MAC-Auth
Answer: D
Explanation:
Employees use 802.1x
The Aruba guest solution uses MAC-auth.
The Portal is not configured on the switch port.
NEW QUESTION # 55
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
- B. Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch
- C. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
- D. Enable trust settings for the AOS-CX switch's SSL certificate
Answer: A
Explanation:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6724/index.html#GUID-2048A4D8-5458-4C00-ACA7-8C392182215E.html
NEW QUESTION # 56
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Limits can be defined only for broadcast and multicast traffic
- B. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- C. Traffic rate limit is configured on queue level
- D. Rate limiting and egress queue shaping can be applied globally
Answer: C
NEW QUESTION # 57
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 2
- B. Client 1 to Client 3
- C. Server 1 to Client 1
- D. Server 2 to Client 2
- E. Client 3 to Client 2
Answer: A,C
NEW QUESTION # 58
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By implementing weighted fair queueing (WFQ)
- B. By defining device profiles with QOS settings
- C. By placing it in the strict priority queue
- D. By implementing voice VLANs
Answer: C
NEW QUESTION # 59
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Define the server group cppm
- B. Set the ports to client-mode
- C. Enable change of authorization (CoA)
- D. Create and assign a local user role to the ports
Answer: C
NEW QUESTION # 60
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable
- B. The default next-hop address supersedes the two preceding next-hop addresses
- C. The traffic is always dropped is the next-hop addresses are unreachable
- D. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2
Answer: B
NEW QUESTION # 61
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and the AOS-CX switches can successfully authenticate users; however, the role information fails to download to the switches. What policy should be added to an intermediate firewall to allow the downloadable role function to succeed?
- A. Allow UDP 1811
- B. Allow TCP 22
- C. Allow TCP 443
- D. Allow UDP 8211
Answer: C
Explanation:
pg 681 from the Aruba guide - "When using DUR, the ClearPass HPE-CPPM-Role VSA is used in combination with HTTPS to transfer the role to the switch." UDP 8211 (PAPI) is related to dynamic segmentation and the communication to the MC not DUR.
NEW QUESTION # 62
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?
- A. IP helper
- B. VRF
- C. Active gateway
- D. VRRP
Answer: C
Explanation:
Active gateway = both devices route/forward traffic VRRP = Active-standbye, only active member routes/forwards traffic Understand the Active Gateway principle In a VSX system, active gateway provides redundant default gateway functionality for the end-hosts. The default gateway of the end-host is automatically handled by both the VSX systems.
NEW QUESTION # 63
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.
Which solution should the company implement?
- A. Downloadable user roles
- B. User-based tunneling
- C. RADIUS dynamic authorization
- D. IPSec
Answer: B
NEW QUESTION # 64
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure the engineers web browser is configured for the same timezone as the AOS-CX switch
- B. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server.
- C. Ensure the engineers PC is synchronized to the same NTP server as the AOS-CX switch
- D. Enable trust settings for the AOS-CX switch's SSL certificate
Answer: C
NEW QUESTION # 65
An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Define the route type and metrics in the OSPF process
- B. Create a route map with the correct route type and metrics
- C. Create a classifier policy with the correct route type and metrics
- D. Define a class and policy map with the correct route type and metrics
Answer: B
NEW QUESTION # 66
......
HP HPE6-A73 (Aruba Certified Switching Professional) certification exam is designed to recognize the knowledge and skills of IT professionals in the field of network switching. HPE6-A73 exam tests the ability of the candidates to deploy, configure, and troubleshoot ArubaOS-Switches in complex enterprise environments. Passing HPE6-A73 exam is an essential requirement for professionals who want to earn the Aruba Certified Switching Professional (ACSP) certification.
Verified HPE6-A73 dumps Q&As - 100% Pass from ActualVCE: https://www.actualvce.com/HP/HPE6-A73-valid-vce-dumps.html
Pass HPE6-A73 Exam in First Attempt Guaranteed 2024 Dumps: https://drive.google.com/open?id=1nEELThmOkudsJZO9UV5npBf06sLtdEvi