FCP_FAZ_AD-7.4 exam questions for practice in 2026 Updated 185 Questions
Updated Mar-2026 Premium FCP_FAZ_AD-7.4 Exam Engine pdf - Download Free Updated 185 Questions
NEW QUESTION # 44
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.)
- A. SMS
- B. SNMP
- C. IM
- D. Email
Answer: B,D
Explanation:
Reference:
FortiAnalyzer_Admin_Guide/1800_Events/0200_Event_handlers/0600_Create_event_handlers.htm
NEW QUESTION # 45
Why must you wait for several minutes before you run a playbook that you just created?
- A. FortiAnalyzer needs that time to back up the current playbooks.
- B. FortiAnalyzer needs that time to parse the new playbook.
- C. FortiAnalyzer needs that time to ensure there are no other playbooks running.
- D. FortiAnalyzer needs that time to debug the new playbook.
Answer: A
NEW QUESTION # 46
Refer to the exhibit.
The exhibit shows the creation of a new administrator on FortiAnalyzer.
What are two effects of enabling the choice Match all users on remote server when configuring a new administrator? (Choose two.)
- A. It allows user accounts in the LDAP server to use two-factor authentication.
- B. It creates a wildcard administrator using an LDAP server.
- C. Administrators can log in to FortiAnalyzer using their credentials on the remote LDAP server.
- D. User Remote-Admin from the LDAP server will be able to log in to FortiAnalyzer at any time.
Answer: B,C
Explanation:
Enabling this option allows any user authenticated by the LDAP server to log in to FortiAnalyzer, effectively creating a wildcard administrator.
NEW QUESTION # 47
Which statement about sending notifications with incident updates is true?
- A. Each incident can send notifications to a single external platform.
- B. Notifications can be sent only when an incident is created or deleted.
- C. You must configure an output profile to send notifications by email.
- D. Each connector used can have different notification settings.
Answer: A
NEW QUESTION # 48
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
- A. FortiAnalyzer1 and FortiAnalyzer2
- B. All devices listed can be members
- C. FortiAnalyzerl and FortiAnalyzer3
- D. FortiAnalyzer2 and FortiAnalyzer3
Answer: B
NEW QUESTION # 49
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)
- A. Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
- B. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with the same FortiAnalyzer devices at the other end.
- C. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.
- D. Log fetching allows the administrator to run queries and reports against historical data by retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer device.
Answer: A,D
Explanation:
Reference:
Using FortiAnalyzer, you can enable log fetching. This allows FortiAnalyzer to fetch the archived logs of specified devices from another FortiAnalyzer, which you can then run queries or reports on for forensic analysis.
The FortiAnalyzer device that fetches logs operates as the fetch client, and the other FortiAnalyzer device that sends logs operates as the fetch server. Log fetching can happen only between two FortiAnalyzer devices, and both of them must be running the same firmware version. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with different FortiAnalyzer devices at the other end.
FortiAnalyzer_7.0_Study_Guide-Online pag. 168
NEW QUESTION # 50
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
- A. Report settings
- B. Report scheduling
- C. Custom datasets
- D. Output profiles
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/upgrade-guide/669300/checking-reports
NEW QUESTION # 51
Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.)
- A. Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
- B. Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
- C. In aggregation mode, you can forward logs to syslog and CEF servers as well.
- D. Both modes, forwarding and aggregation, support encryption of logs between devices.
Answer: B,D
Explanation:
A) FortiAnalyzer_7.0_Study_Guide-Online.pdf page 148: The log communication between devices can be protected by encryption, with the desired encryption level, using the commands shown on the slide. (You need to interpret this. "Real time" and "aggregation" is about the "moment" when Fortigate sends the logs.
However, no matter the moment, Fortigate will upload logs encrypted or unencrypted based on previous / differente config).
C) FortiAnalyzer_7.0_Study_Guide-Online.pdf page 147: Aggregation: Logs and content files stored and uploaded at scheduled time.
NEW QUESTION # 52
On FortiAnalyzer, what is a wildcard administrator account?
- A. An account that allows guest access with read-only privileges
- B. An account that validates against any user account on a FortiAuthenticator
- C. An account that requires two-factor authentication
- D. An account that permits access to members of an LDAP group
Answer: D
Explanation:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/747268/configuring-wildcard-admin-accounts
NEW QUESTION # 53
Refer to the exhibit.
The exhibit shows the creation of a new administrator on FortiAnalyzer.
What are two effects of enabling the choice Match all users on remote server when configuring a new administrator? (Choose two.)
- A. It allows user accounts in the LDAP server to use two-factor authentication.
- B. It creates a wildcard administrator using an LDAP server.
- C. Administrators can log in to FortiAnalyzer using their credentials on the remote LDAP server.
- D. User Remote-Admin from the LDAP server will be able to log in to FortiAnalyzer at any time.
Answer: B,C
Explanation:
Enabling this option allows any user authenticated by the LDAP server to log in to FortiAnalyzer, effectively creating a wildcard administrator.
NEW QUESTION # 54
Which two statements regarding the log synchronization states for HA on FortiAnalyzer are true? (Choose two.)
- A. Log Data Sync provides real-time log synchronization to all backup devices.
- B. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- C. By default, Log Data Sync is disabled on all backup devices.
- D. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
Answer: A,B
NEW QUESTION # 55
You finished registering a FortiGate device. After traffic starts to flow through FortiGate. you notice that only some of the logs expected are being received on FortiAnalyzer.
What could be the reason for the logs not arriving on FortiAnalyzer?
- A. FortiGate does not have logging configured correctly.
- B. This FortiGate is part of an HA cluster but it is the secondary device.
- C. FortiGate was added to the wrong ADOM type.
- D. This FortiGate model is not fully supported.
Answer: A
Explanation:
This FortiGate is part of an HA (High Availability) cluster, but it is a secondary device. In an HA configuration, typically only the primary device is responsible for sending logs to FortiAnalyzer, while the secondary device may not send logs unless the primary device fails.
NEW QUESTION # 56
A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see what activity was performed by that rogue administrator on FortiAnalyzer.
What can you do on FortiAnalyzer to accomplish this?
- A. View the tasks performed by the rogue administrator in Fabric View.
- B. Click FortiView and generate a report for that administrator.
- C. Click Task Monitor and view the tasks performed by that administrator.
- D. Click Log View and generate a report for that administrator.
Answer: C
Explanation:
Reference: https://docs.fortinet.com/document/fortimanager/6.4.1/administration-guide/792943/task-monitor FortiAnalyzer_7.0_Study_Guide-Online.pdf page 54: View the tasks FortiAnalyzer administrators have performed, including progress and status.
NEW QUESTION # 57
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
- A. All devices listed can be members.
- B. FortiAnalyzer1 and FortiAnalyzer3
- C. FortiAnalyzer1 and FortiAnalyzer2
- D. FortiAnalyzer2 and FortiAnalyzer3
Answer: C
Explanation:
Based on the partial configuration output, the primary factor for determining which devices can be members of a FortiAnalyzer Fabric is the log-mode setting. Devices with the same log mode can be part of the same FortiAnalyzer Fabric.
FortiAnalyzer1: Log mode is set to collector.
FortiAnalyzer2: Log mode is set to collector.
FortiAnalyzer3: Log mode is set to analyzer.
Devices with the same log mode can be part of the same fabric. Since FortiAnalyzer1 and FortiAnalyzer2 both have their log modes set to collector, they can be members of a FortiAnalyzer Fabric.
Therefore, the correct answer is FortiAnalyzer1 and FortiAnalyzer2.
NEW QUESTION # 58
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
- A. Report information
- B. Logs from registered devices
- C. Database snapshot
- D. System information
Answer: A,D
Explanation:
What does the System Configuration backup include?
System information, such as the device IP address and administrative user information.
Device list, such as any devices you configured to allow log access.
Report information, such as any configured report settings, as well as all your custom report details. These are not the actual reports.
FortiAnalyzer_7.0_Study_Guide-Online pag. 29
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 29: What does the System Configuration backup include?
* System information, such as the device IP address and administrative user information
* Device list, such as any devices you configured to allow log access
* Report information, such as any configured report settings, as well as all your custom report details. These are not the actual reports.
NEW QUESTION # 59
Refer to the exhibit.
Based on the output, what can you conclude about the FortiAnalyzer logging status?
- A. FortiGate is sending logs again after it performed a reboot.
- B. FortiGate has logs to send, but FortiAnalyzer is unavailable.
- C. The connection between FortiGate and FortiAnalyzer is overloaded.
- D. FortiGate is configured to send logs in batches.
Answer: B
Explanation:
The output shows that FortiGate has sent a large number of logs (sent=180189698), but some logs have failed to be sent (failed=4507). This suggests that FortiAnalyzer was temporarily unavailable or had an issue receiving logs, leading to the failure count. There are no logs cached or dropped, indicating FortiGate is still attempting to send logs but with some failures.
NEW QUESTION # 60
......
Authentic FCP_FAZ_AD-7.4 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.actualvce.com/Fortinet/FCP_FAZ_AD-7.4-valid-vce-dumps.html
Fortinet FCP_FAZ_AD-7.4 Real Exam Questions Guaranteed Updated Dump from ActualVCE: https://drive.google.com/open?id=1PDi2Q9c8CR7ZR5uugeLekdA_BruM2QDy