Grab latest VMware 5V0-42.21 Dumps as PDF Updated on 2023
Newly Released 5V0-42.21 Dumps for VMware SD-WAN Design and Deploy 2021 Certified
The VMware 5V0-42.21 certification exam covers a wide range of topics, including SD-WAN architecture, deployment models, routing and security, and troubleshooting. Candidates are required to have a deep understanding of SD-WAN design principles, including how to configure and deploy SD-WAN appliances, design network topologies, and implement security policies. They should also be familiar with SD-WAN deployment models, such as hub-and-spoke, full-mesh, and partial-mesh. Overall, the VMware 5V0-42.21 certification exam is a comprehensive test of a candidate's ability to design and deploy VMware SD-WAN solutions, making it an essential certification for professionals looking to advance their careers in network engineering and administration.
NEW QUESTION # 11
A service provider needs to upgrade a gateway to a new software version.
Which step in needed to complete the upgrade process?
- A. Re-assign the Gateway to a new gateway Pool with the appropriate software version, and then run 'sudo apt-get update'' from the Gateway console.
- B. Copy the new image to/var/lib/velocloud/software_update.tar, and then run the upgrade thescript from the console.
- C. From the Orchestrator, select the check-box next to the appropriate gateway, choose ''Assign Software image", and then select the version for the upgrade.
- D. Create a new disk partition to save the new software image to, modify the boot order via the Gateway BIOS to boot to the new partition, and then reboot the gateway.
Answer: D
NEW QUESTION # 12
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?
- A. On-premises SD-WAN Orchestrator/Controller
- B. Partially on-premises
- C. Hosted SD-WAN Orchestrator/Controller
- D. All on-premises
Answer: D
NEW QUESTION # 13
What are three key benefits of VMware SD-WAN? (Choose three )
- A. Remove requirement of Edge devices
- B. Gain visibility across any link
- C. Reduce the burden on MPLS
- D. Provision Edges in minutes
- E. Layer 2 VPNs between sites
- F. Automated configuration of cloud resources
Answer: A,C,F
NEW QUESTION # 14
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
- A. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.
- B. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
- C. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
- D. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
Answer: A
NEW QUESTION # 15
The VMware SD-WAN solution is comprised of Orchestrator, Gateway, and Edge. The architecture ensures separation and secure communication between the management, control, and data plane of the solution.
The management plane consists of the VMware SD-WAN Orchestrator, and the control plane is comprised of the VMware SO-WAN Gateway/ Controller. Which statement correctly describes this situation?
- A. To make the entire solution to work property, TCP port 443 and HOP port 500 and UDP port 4500 are required to open in the firewall rule, if Edge is deployed behind a Firewall.
- B. There is impact on data plane when the Edge loses connectivity to the management plane. The operator only loses the visibility of the Edge from Orchestrator and cannot make configuration changes on the Edge until the management plane connectivity is resumed.
- C. Traffic between VMware SD-WAN Edges and from VMware SD-WAN Edges to VMware SD-WAN Gateways uses VMware SD-WAN Management Protocol (VCMP) tunneling over User Datagram Protocol (UDP) port 2427. secured with Internet Protocol Security (IPSec)
- D. VMware SD-WAN Edges/Gateways establishes a Transport Layer Security (TLS) 1 2 encrypted session to the VMware SU-WAN Orchestrator
Answer: C
NEW QUESTION # 16
What is considered a typical VMware SD-WAN use case?
- A. Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator.
- B. Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network designintegrationoptions.
- C. Provide cloud delivered central management Orchestrator toimplementcomplex design network integration options.
- D. Provide high speed layer 2 data center interconnects.
Answer: A
NEW QUESTION # 17
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.
- D. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
Answer: A
NEW QUESTION # 18
Which role(s) must be enable under Gateway configuration page to allow a VMware SD-WAN Gateway to build IPsec tunnels to non-VM SD-WAN?
- A. Control Plane + Data Plane + Partner Gateway
- B. Control Plane
- C. Control Plane + Data Plane + SecureVPN Gateway
- D. Control Plane + Secure VPN Gateway
Answer: A
NEW QUESTION # 19
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - D. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default.
Answer: A
NEW QUESTION # 20
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate Disabled
- B. Certificate ate Optional
- C. Certificate Requited
- D. Certificate Enabled
- E. Certificate Accepted
- F. Certificate Activated
Answer: A,D,E
NEW QUESTION # 21
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 4 segments
- B. 2 segments
- C. 5 segments
- D. 6 segments
Answer: C
NEW QUESTION # 22
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Edge
- B. VMware SD-WAN Hub
- C. VMware SD-WAN Orchestrator
- D. VMware SD-WAN Controller
Answer: D
NEW QUESTION # 23
An administrator is looking for a cost effective model of hardware-based Edge for some branch offices. The device must be mounted in rack cabinet, and to meet performance requirements and projected growth, the appliance must support up to 2 Gpbs bandwidth.
Which Edge modelsatisfies these requirements?
- A. Edge 540
- B. Edge 620
- C. Edge 3400
- D. Edge 510
Answer: A
NEW QUESTION # 24
A service provider needs to ensure that the NOC is notified proactively in the event that an Edge interface loses connectivity to its WAN provider.
Which three methods are available for generating these alerts? (Choose three.)
- A. Webhook
- B. Slack notification
- C. Dyinq Gasp
- D. Text/SMS
- E. Push notification via the VMware SD WAN mobile app
- F. SNMP Trap
Answer: C,D,E
NEW QUESTION # 25
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 4 segments
- B. 2 segments
- C. 5 segments
- D. 6 segments
Answer: C
NEW QUESTION # 26
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. Cloud VPN
- B. VRRP
- C. Split Brain Detection
- D. SD-WAN Service Reachable on the private overlay
Answer: D
NEW QUESTION # 27
......
The VMware 5V0-42.21 exam is a challenging test that requires a deep understanding of SD-WAN technology and the ability to apply that knowledge in a real-world setting. However, passing this exam can lead to numerous benefits for IT professionals, including increased job opportunities, higher salaries, and greater job security. Additionally, the knowledge and skills gained from preparing for this exam can help professionals to design and deploy more effective SD-WAN solutions that meet the evolving needs of their organization.
Latest 5V0-42.21 Exam Dumps VMware Exam from Training: https://www.actualvce.com/VMware/5V0-42.21-valid-vce-dumps.html