Guide (New 2024) Actual Fortinet NSE6_FSW-7.2 Exam Questions
NSE6_FSW-7.2 Exam Dumps Pass with Updated 2024 Certified Exam Questions
Fortinet NSE6_FSW-7.2 Exam is a certification program that validates the skills and knowledge of network security professionals in deploying and managing FortiSwitch products. Fortinet NSE 6 - FortiSwitch 7.2 certification is recognized worldwide and is highly valued in the IT industry. Passing NSE6_FSW-7.2 exam is an excellent way for network security professionals to demonstrate their expertise and enhance their career prospects.
NEW QUESTION # 19
To enhance service in emergency situations, to which LLDP-MED Type-Length-Values does Forti-Switch advertise to IP phones?
- A. Location
- B. Power management
- C. Inventory management
- D. Network policy
Answer: C
NEW QUESTION # 20
Exhibit.
You need to manage three FortiSwitch devices using a FortiGate device. Two of the FortiSwitch devices initiated a reboot after the authorization process. However, the FortiSwitch device with the configuration shown in the exhibit. did not reboot All three devices completed FortiLink manage-ment authorization successfully.
Why did the FortiSwitch device shown in the exhibit not reboot to complete the authorization pro-cess?
The management mode was set to use FortiLink mode.
- A. The system time is not in-sync and is using a non-default value
- B. The FortiSwitch device is scheduled to reboot as part the authorization process
- C. The management mode was set to use FortiLink mode.
- D. Switch auto-discovery is enabled.
Answer: C
NEW QUESTION # 21
Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)
- A. A local user database must be used to authenticate devices using the 802.1X authentica-tion protocol.
- B. A security policy is used to apply 802.1 authentication on a port.
- C. All devices connecting to FortiSwitch must support 802.1X authentication.
- D. All hosts behind an authenticated port are allowed access after a successful authentica-tion.
Answer: B,D
NEW QUESTION # 22
Refer to the exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
- B. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
- C. port23 is configured as the dedicated management interface.
- D. A standalone switch with the shown serial number is connected on port23.
Answer: D
NEW QUESTION # 23
Which is a requirement to enable SNMP v2c on a managed FortiSwitch?
- A. Configure SNMP agent and communities.
- B. Create an SNMP user to use for authentication and encryption.
- C. Specify an SNMP host to send traps to.
- D. Enable an SNMP v3 to handle traps messages with SNMP hosts.
Answer: A
NEW QUESTION # 24
Exhibit.
LAG and MCLAG are used to increase the available network bandwidth and enable redundancy. How does spanning tree protocol see MCLAG and LAG if they are configured based on the physi-cal view shown in the exhibit? (Choose two)
- A. Switch 3 and switch 4 are seen as one MCLAG switch client
- B. Switch 1. Switch 2, and Switch 3 are seen as one MCLAG peer group
- C. Switch 1 and Switch 2 both seen as one single switch.
- D. Switch 3 and Switch 4 uplinks are treated as single interfaces.
Answer: A,C
NEW QUESTION # 25
Which two statements about managing a FortiSwitch stack on FortiGate are true? (Choose two.)
- A. The switch controller feature must be enabled on FortiGate.
- B. FortiSwitch must be operating in standalone mode before authorization.
- C. Only a hardware-based FortiGate can manage a FortiSwitch stack.
- D. A FortiLink interface must be enabled on FortiGate.
Answer: A,D
NEW QUESTION # 26
Exhibit.
Two routes are not installed in the forwarding information base (FIB) as shown in the exnibit. Which two statements about these two route entries are true? (Choose two.)
- A. These two routes will be used as load-balancing routes.
- B. These two routes have a higher administrative distance value available to the destina-tion networks.
- C. These two routes are available in the hardware routing table.
- D. These two routes will become primary, if the best routes are removed.
Answer: B,D
NEW QUESTION # 27
How are the 'by VLAN redirect MAC address quarantine' mode and the 'by redirect MAC address quarantine' mode on FortiGate similar?
- A. Both modes block intra-VLAN traffic by FortiGate automatically.
- B. Both modes add quarantined device MAC addresses to the blocked firewall address group.
- C. Both modes require firewall policies to block inter-VLAN traffic.
- D. Both modes move quarantined devices to the quarantine VLAN.
Answer: A
NEW QUESTION # 28
Which two statements about DHCP snooping enabled on a FortiSwitch VLAN are true? (Choose two.)
- A. Settings related to DHCP option 82 are only configurable through the CLI
- B. switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks.
- C. By default, all FortiSwitch ports are set to forward client DHCP requests to untrusted ports.
- D. Enabling DHCP snooping on a FortiSwitch VLAN ensures requests and replies are seen by all DHCP servers.
Answer: A,C
NEW QUESTION # 29
Which statement about the use of the switch port analyzer (SPAN) packet capture method is true?
- A. SPAN can be configured only on a standalone FortiSwitch.
- B. Traffic on the management interface can be mirrored and captured by the monitoring device.
- C. The monitoring device must be connected to the same switch where the traffic is being mirrored
- D. Mirrored traffic can be sent across multiple switches.
Answer: B
NEW QUESTION # 30
Refer to the diagnostic output:
Two entries in the exhibit show that the same MAC address has been used in two different VLANs. Which MAC address is shown in the above output?
- A. It is a MAC address of FortiLink interface on FortiGate.
- B. It is a MAC address of FortiGate in HA configuration.
- C. It is a MAC address of a switch that accepts multiple VLANs.
- D. It is a MAC address of an upstream FortiSwitch.
Answer: C
NEW QUESTION # 31
Refer to the exhibit.
What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
- A. Maximum value to accept clients DHCP request is configured as per DHCP server range.
- B. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.
- C. DHCP clients that are trusted by DHCP snooping configured is only one.
- D. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
Answer: C,D
NEW QUESTION # 32
What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?
- A. POE with high density FortiSwitch
- B. HA backup FortiGate managing FortiSwitch
- C. FortiGate managing FortiSwitch
- D. FortiSwitch functioning as standalone
Answer: C
NEW QUESTION # 33
Exhibit.
What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)
- A. The port full speed prior the split was 100G SFP+
- B. The split port can be assigned to native VLAN
- C. The CLI commands are enabling a splitpo rt into four 10Gbps interfaces.
- D. The FortiSwitch model is equipped with a maximum of 54 interfaces.
Answer: C,D
NEW QUESTION # 34
Refer to the diagnostic output:
What makes the use of the sniffer command on the FortiSwitch CLI unreliable on__port__23?
- A. The types of packets captured is limited.
- B. Only untagged VLAN traffic can be captured.
- C. The switch port might be used as a trunk member
- D. Just the port egress payloads are printed on CLI.
Answer: A
NEW QUESTION # 35
Exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch.
Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. Ports connect to adjacent FortiSwitch devices will show their.serial number as the na-tive VLAN
- B. A standalone switch with the showm serial number is connected on por123.
- C. Port23 is configured as the dedicated management interface.
- D. Port23 is a member of a trunk that uses the Access-1 FortiSwitch senal number as the name of the trunk.
Answer: A
NEW QUESTION # 36
Which feature should you enable to reduce the number or unwanted IGMP reports processed by the IGMP querier?
- A. Enable IGMP flood unknown multicast traffic on the global setting.
- B. Enable IGMP snooping proxy.
- C. Enable the IGMP flood setting on the static port for all multicast groups.
- D. Enable the IGMP flood reports setting on the mRouter port.
Answer: B
NEW QUESTION # 37
How does FortiSwitch perform actions on ingress and egress traffic using the access control list (ACL)?
- A. Classifiers enable matching traffic based only on the VLAN ID.
- B. Only high-end FortiSwitch models support ACL.
- C. ACL can be used only at the prelookup stage in the traffic processing pipeline.
- D. FortiSwitch checks ACL policies only from top to bottom.
Answer: D
NEW QUESTION # 38
Exhibit.
port24 is the only uplink port connected to the network where access to FortiSwitch management services is possible. However, FortiSwitch is still not accessible on the management interface. Which two actions should you take to fix the issue and access FortiSwitch? (Choose two.)
- A. You should use VLAN ID 4094 as the native VLAN on port24.
- B. You must add VLAN ID 200 to the allowed VLANS on internal.
- C. You must allow VLAN ID 4094 on port24, if management traffic is tagged.
- D. You must add port24 native VLAN as an allowed VLAN on internal.
Answer: A,C
NEW QUESTION # 39
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
- A. Add power management as part of LLDP-MED TLVs to advertise.
- B. Create new a LLDP-MED application type to define the PoE parameters.
- C. Define an LLDP-MED location ID to use standard protocols for power.
- D. Assign a new LLDP profile to handle different LLDP-MED TLVs.
Answer: A
NEW QUESTION # 40
Which QoS mechanism maps packets with specific CoS or DSCP markings to an egress queue?
- A. Rate limiting for egress traffic
- B. Queuing for egress traffic
- C. Classification for ingress traffic
- D. Marking for ingress traffic
Answer: C
NEW QUESTION # 41
......
Fortinet NSE6_FSW-7.2 Exam covers a wide range of topics, including the deployment and configuration of FortiSwitch products, VLAN configuration, and advanced switch management. NSE6_FSW-7.2 exam also tests candidates on their ability to integrate FortiSwitch with other Fortinet products, such as FortiGate firewalls and FortiAnalyzer. Fortinet NSE 6 - FortiSwitch 7.2 certification helps professionals gain in-depth knowledge of FortiSwitch products and their functionalities, enabling them to enhance the security and performance of their network infrastructure.
Pass Guaranteed Quiz 2024 Realistic Verified Free Fortinet: https://www.actualvce.com/Fortinet/NSE6_FSW-7.2-valid-vce-dumps.html
NSE6_FSW-7.2 Exam Questions - Real & Updated Questions PDF: https://drive.google.com/open?id=1KbdhLKUnxUEhU2TpxDad0cXl4jPFLuZ3