HPE ASE HPE0-J68 Real Exam Questions and Answers FREE Updated on Sep 01, 2021
HPE0-J68 Ultimate Study Guide - ActualVCE
NEW QUESTION 19
How does the HPE StoreVirtual VSA storage platform scale performance and capacity?
- A. recreates storage pools on multiple devices
- B. eliminates the need for storage controllers
- C. enables access through multiple protocols
- D. aggregates all resources into a single storage pool
Answer: A
NEW QUESTION 20
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Persistent port (96)
- B. Peer persistence
- C. Persistent Memory
Answer: A
Explanation:
D Persistent Cache
NEW QUESTION 21
You are adding a new host for an HPE 3PAR StoreServ proof-of-concept .In addition to the host name ,What is the minimum information that is required to create a host profile?
- A. Host Persona
- B. Host set
- C. Host WWN
- D. Host MAC
Answer: C
NEW QUESTION 22
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?
- A. HPE SAN Network Advisor
- B. HPE Synergy Composer
- C. HPE Synergy Image Streamer
- D. HPE InfoSight for 3PAR
Answer: B
NEW QUESTION 23
Due to industry regulation a customer is required to store backup at a separate data center from the company's main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?
- A. HPE storeServe 3par in main and secondary data center with RCIP replication between arrays
- B. HPR StoreServ 3PAR in main data center and HPE StoreOnce in both main and secondary data center.
- C. HPE Storeserve 3Par in main data center HPE StoreOnce in secondary data center with RMC
- D. Nimble AF series in main data center and Nimble SF series in secondary data center
Answer: C
NEW QUESTION 24
When using a HPE 3 PAR Storeserv array to enable a user to apply array-based data services to specific application and VM's. What is the benefit of implementing VM-level gradually of Volts?
- A. Performance is accelerated by leveraging the deduplication capabilities built into the storage ASIC
- B. Data sprawls eliminated by performing the migration functions at the array level using 3PAR HPE Dynamic Optimization
- C. Efficiency is maintained by reclaiming space from deleted or migrated VMs using capabilities built into the storage ASIC
- D. Performing is accelerated by detecting and moving the most frequently -accessed VMs into the fast class tier
Answer: C
NEW QUESTION 25
Which statement is true when defining object storage ?
- A. It is most suited for sharing files and characterized by volumes
- B. It is most suited for unstructured data and characterized by containers or buckets
- C. It is most suited for unstructured data and characterized by file share protocols like NFS
- D. suited for database It is most and characterized by containers or buckets
Answer: B
NEW QUESTION 26
A customer has an existing configuration consisting of first class and nearline SAS drive in an 8000 SFF enclosure. They add two SFF 8000enclosure that are fully populated with nearline drives to an existing HPE 3Par storeserv 8400 array. What should the customer do to optimize their storage configuration?
- A. Run tunesys and on the array (275)
- B. Create new CPG for the newly installed drivers
- C. Enable space reclamation
- D. Defrag the CPG and run align drive on their system
Answer: A
NEW QUESTION 27
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?
- A. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
- B. Design an array with older version of the firmware to ensure compatibility
- C. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
- D. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
Answer: C
NEW QUESTION 28
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Persistent Cache
- B. Express Writes
- C. Express Indexing
- D. Zero Detect
Answer: B
NEW QUESTION 29
A large enterprise is experiencing exponential data growth of their existing Oracle databases.
They are concerned about their increasing backup windows and the risk of non-compliance with recovery time objectives increase of data corruption in primary storage. Their primary storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System.
Which HPE storage solution allow the customer to migrate this risk?
- A. StoreOnce unified deduplication
- B. RMC Express protect
- C. Catalyst in-Flight compression
- D. 3 PAR remote copy
Answer: B
NEW QUESTION 30
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?
- A. virtual Copy
- B. Network RAID
- C. Dynamic Optimization
- D. Peer Motion
Answer: D
NEW QUESTION 31
Which statement describes HPE StoreVirtual Network RAID functionality?
- A. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
- B. Network RAID 10 requires an even number of storage nodes.
- C. Volumes remain available if an odd number of nodes are available.
- D. Redundancy is managed on a per-volume basis.
Answer: D
Explanation:
Redundancy is managed on a per volume basis to improve storage utilization and to remove any simgle point of failure.
NEW QUESTION 32
You are demonstrating adding a new virtual volume for an HPE 3PAR Storeserv array for your customer.in addition to the volume name ,What is the minimum information required to create a virtual volume(select two)
- A. Domain
- B. Persona type
- C. Size
- D. Host
- E. CPG
Answer: C,E
NEW QUESTION 33
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?
- A. VSAN
- B. Zoning
- C. Port isolation
- D. IVR
Answer: C
NEW QUESTION 34
A customer has a SAN infrastructure with an HPE C-Class blade enclosure, and a mix of ProLiant G7, Gen8 and Gen9 servers. They require a new storage platform.
How can you confirm the new storage array will be supported in the existing environment?
- A. Design an array with the latest firmware, and recommend that the customer engage HPE PointNext to upgrade the existing hardware.
- B. Check recommended firmware levels in the HP SAN Design Reference Guide to ensure firmware compatibility.
- C. Document existing server and SAN information, and consult SPOCK to ensure firmware compatibility.
- D. Design an array with an older version of the firmware to ensure compatibility.
Answer: C
NEW QUESTION 35
A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?
- A. Synergy 12000
- B. Converged systems
- C. Bladesystem 7000
- D. Simplicity 380
Answer: D
NEW QUESTION 36
A customer run several HPE 3PAR storeserv system in their environment using data rest encryption .The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.. What is the requirement for this solution?
- A. Boot server for the existing 3PAR storeserv array must be replaced with self-encrypting drive
- B. HPE ESKM FIPS mode must be disabled by the administrator
- C. Data on the existing HPE 3PAR storeserv array must be decrypted and re-encrypted with new keys
- D. All drives of the new HPE 3PAR storeserv array must be self-encrypting
Answer: D
NEW QUESTION 37
A customer need to update the local sever at each of their branches keep up with the increasing demand for High-performance storage. The customer cannot afford to move to SAN at each state. Which HPE storage technology can increase performance for this customer?
- A. Persistent Cache
- B. Smart Path
- C. SmartCache
- D. Adaptive Flash Cache
Answer: C
NEW QUESTION 38
Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?
- A. NinjaStars
- B. NinjaProtected
- C. NinjaCrawler
- D. StoreVista
Answer: B
Explanation:
By performing a free NinjaProtected backup assessment, HPE and its partners can demonstrate how customers can reduce the amount of backup data they need to store by 95%-guaranteed (HPE StoreOnce Get Protected Guarantee Program
NEW QUESTION 39
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
- A. Run tunesys after raising the AFC to take advantage of the additional space
- B. Increase current AFC configuration to reflect the additional space
- C. Remove flash cache for all VVS then run create Flash cache
- D. Remove the old AO configuration and recreate a new one
Answer: C
NEW QUESTION 40
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. StoreServ Peer Motion
- B. Store virtual Peer motion
- C. HPE 3PAR Remote Copy
- D. Recovery Manager central
Answer: D
NEW QUESTION 41
......
Ultimate Guide to Prepare HPE0-J68 Certification Exam for HPE ASE: https://www.actualvce.com/HP/HPE0-J68-valid-vce-dumps.html
Use Real HPE0-J68 Dumps - HP Correct Answers: https://drive.google.com/open?id=1z60QsIJgFT5aCnFmQ0ErS7UwMpvMLMNO