HPE2-T37 PDF Dumps Jan 06, 2022 Exam Questions – Valid HPE2-T37 Dumps
Ultimate HPE2-T37 Guide to Prepare Free Latest HP Practice Tests Dumps
NEW QUESTION 24
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
- B. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
- C. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
- D. A logical enclosure is created automatically, and it is always based on a single enclosure.
Answer: D
NEW QUESTION 25
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not configured with the required Smart Link parameter.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION 26
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. An external repository must be created, because standalone components are supported only In an external repository.
- B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- C. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
- D. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
Answer: A
NEW QUESTION 27
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 28
After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?
- A. The replacement server has more memory or CPUs than broken machine.
- B. IL0 firmware of the replacement server is different than firmware in broken server.
- C. Server profile affinity is configured to Device Day + server hardware.
- D. The enclosure group has to be updated to match the original enclosure group.
Answer: B
NEW QUESTION 29
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Secure boot
- B. BIOS management
- C. Boot from SAN
- D. Workload profile
Answer: A
NEW QUESTION 30
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
- B. The maximum supported number of the internal networks for logical interconnect is configured.
- C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- D. For FC uplink sets, an additional uplink from second module should be added for redundancy.
Answer: A
NEW QUESTION 31
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Appliance support dump
- C. Firmware deployment support dump
- D. Enclosure group support dump
- E. Maintenance console support dump
Answer: A,E
NEW QUESTION 32
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION 33
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile within server profile template and update all profiles.
- C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- D. Set a specific workload profile using IL0 interface for each individual server.
Answer: C
NEW QUESTION 34
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION 35
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether the appropriate license for HPE Primera Is available in HPE OneView.
- B. whether WSAPI service is enabled on HPE Primera array.
- C. whether array management using HPE OneView is enabled in SSMC.
- D. whether there are at least two Fibre Channel networks defined in HPE OneView.
Answer: B
NEW QUESTION 36
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. Both FlexNlCs must be connected to the same network.
- B. The Compute Module profile must have exactly two connections defined.
- C. The sFlow option must be enabled and configured.
- D. An upgrade license must be purchased and deployed.
Answer: C
NEW QUESTION 37
Which statement about RoCE network restrictions is true?
- A. RoCE networks are not supported with HPE BladeSystem
- B. RoCE networks require Virtual Connect SE 32Gb FC Modules.
- C. RoCE networks cannot be configured when Virtual Connect modules are used.
- D. RoCE networks are supported only when PVLANs are enabled.
Answer: A
NEW QUESTION 38
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses to IL0 and interconnect modules if applicable
- B. to provide static IP addresses for storage systems managed in HPE OneView
- C. to provide static IP addresses for an operating system running on a Compute Module
- D. to provide static IP addresses for Logical Interconnects and Logical Enclosures
Answer: C
NEW QUESTION 39
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- B. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- C. Ensure that the Link Aggregation Group time-out value matches the server set values.
- D. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
Answer: B
NEW QUESTION 40
......
Passing Key To Getting HPE2-T37 Certified Exam Engine PDF: https://www.actualvce.com/HP/HPE2-T37-valid-vce-dumps.html
Get Top-Rated HP HPE2-T37 Exam Dumps Now: https://drive.google.com/open?id=17yXd-ElPjW8Mjr-n8EJh8kNLGSCIskFF