MB-320 Practice Exam Tests Latest Updated on Oct-2021
Pass MB-320 Exam in First Attempt Guaranteed Dumps!
NEW QUESTION 78
A company is implementing Dynamics 365 for Finance and Operations in their manufacturing environment.
The manufacturing process uses formulas to direct material consumption on the batch orders.
During production some items in the formula must be consumed automatically from the production area, while some must be picked with their actual consumption reported on a pick list.
You need to determine which setup method is used for formula lines to allow for the desired mixed method picking processes.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Leave the flushing principle blank on formula lines and set resource consumption to direct flushing principle of materials based on consumption method for the line.
- B. Leave the flushing principle blank on formula lines and set the default start value to Always for Automatic Bill of Material Consumption.
- C. Leave the flushing principle blank on formula lines and set default flushing principle on the items based on consumption method for the item.
- D. Set the flushing principle on each formula line based on consumption method for the line.
Answer: A,D
Explanation:
Section: Create and manage production and lean orders
NEW QUESTION 79
You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption are to be completed before Report as finish.
You are running a production order with BOM lines that have a Flushing principle set to Start. The Automatic Route Consumption Runtime has been set to Yes.
You have set up the default Start user options for all production orders as shown in the exhibit below.
Answer:
Explanation:
Explanation
NEW QUESTION 80
A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use ProductB to adjust the concentration of active ingredients in the lotion.
You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Set the formula line type of ProductA to Active.
- B. Set the formula line type of ProductA to Compensating.
- C. Set the formula line type of ProductB to Compensating.
- D. Set the formula line type of ProductC to None.
- E. Set the formula line type of ProductB to Active.
Answer: A,C
NEW QUESTION 81
You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company. It is the end of the year and the labor rates have been recalculated based on new salary data. You need to update the effective labor costs for all labor groups.
Which element must be updated?
- A. cost category
- B. shared category
- C. cost groups
- D. production orders
- E. resource group
Answer: D
NEW QUESTION 82
A company that produces rubber hose using Discreet orders accounts for raw material scrap after report as finished though inventory movement journals.
The company has noticed that most of the scrap that is recorded is due to start up that feeds the hose to the finishing process. In addition, the amount of scrap that is recorded is consistent regardless of the amount of hose being produced.
You need to account for material lost during startup.
What should you do?
- A. Do a case study for the scrap items and enter the average amount of scrap as a separate line items on the Bill of materials.
- B. Enter the amount of scrap that is consumed as constant scrap in the Bill of materials.
- C. Enter the consumption amount on the line to match the actual amount used.
- D. Enter the amount of scrap that is consumed as variable scrap in the Bill of materials.
Answer: D
NEW QUESTION 83
You maintain responsible resource calendars and production orders for a manufacturing company. All production resources use the same production calendar.
A machine in the facility is defective and must be closed for repairs for the next two days.
You need to configure the resource calendar to close the resource for production for the next two days.
What should you do?
- A. Navigate to the resource group. Change the calendar to closed on the resource group.
- B. Navigate to the resource. Change the calendar to closed on the resource.
- C. Navigate to the resource and select Calendar deviations. Set the calendar to closed for the next two days.
- D. Navigate to the calendar used for production and close the next two days.
Answer: C
NEW QUESTION 84
A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 for Finance and Operations. The system must meet the following requirements:
* Schedule the batch production of products.
* Plan for inventory fluctuations of ingredients that are used across different products.
* Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.
The company is starting the initial setup of their Dynamics 365 environment.
Answer:
Explanation:
NEW QUESTION 85
You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.
You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.
You need to schedule the order.
Which scheduling parameters should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/operation-sch
NEW QUESTION 86
A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations.
You have been provided the following information for a new relieving lotion.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 87
A company that uses Lean manufacturing concepts to produce paper plates has redesigned the layout of the warehouse and production floor.
The company's production flow activities no longer match the tasks of the workers. Employees use paper and manual communication to complete the tasks.
You need to update the production flows to match their current processes by deactivating the obsolete production flows and creating new ones.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 88
A manufacturer uses route operations and job scheduling.
You use a unique calendar for a conveyor line. The company observes a decrease in the number of hours a conveyor line resource is operational due to breakdowns. You must make a temporary change to the number of hours the resource is available.
You need to adjust the efficiency percentage for the conveyor line calendar.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 89
A company implements Dynamics 365 for Finance and Operations.
Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company. You have the following requirements:
* Locate a supermarket at the subcontractor building.
* Support picking and shipping activity tracking.
* Associate costs of transporting materials between the locations in the cost of the finished product.
You need to modify the production flow.
A company implements Dynamics 365 for Finance and Operations.
Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company. You have the following requirements:
* Locate a supermarket at the subcontractor building.
* Support picking and shipping activity tracking.
* Associate costs of transporting materials between the locations in the cost of the finished product.
You need to modify the production flow.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Modify the tumble polish activity and assign it to the subcontractor.
- B. Create a new production flow version.
- C. Create transfer activities and assign thereto the subcontractor.
- D. Create a resource and work cell resource group for the subcontractor.
- E. Modify the tumble polish operation and associate it with the subcontractor.
Answer: A,C,D
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work-produ
NEW QUESTION 90
A manufacturing plant uses Lean manufacturing. Operators process Kanban consumption manually by using a mobile device.
The production team must use automatic empty registration for some of the event Kanbans. Registration must occur when the last job of a Kanban is completed.
You need to update the Kanban rule to meet this requirement.
What Kanban setting should you update?
- A. Select to register as empty when the source requirement is registered.
- B. Set a fixed Kanban quantity.
- C. Select to manually register as empty.
- D. Select to register as empty when handling units are received.
Answer: D
NEW QUESTION 91
A company that uses discreet manufacturing concepts to produce solar panels has a temporary change of glass supplier. The substitute glass will only be used for three months. The company also uses Bill of materials (BOM) version to track changes of the raw materials.
Managers are manually adjusting the production picking lists to reflect the alternate glass that is being temporarily used. The time spent doing manual adjustments to production picking lists has become a burden.
You need to create a new BOM with the alternate glass and include a from and to date on the BOM version.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Edit the current route to reflect the substitute material
2 - Set up an alternative item number on the release product.
3 - Create a new BOM and BOM version that includes the temporary glass substitute.
NEW QUESTION 92
You are the production planner for a manufacturing company.
After running operations scheduling for a production order, the following error message displays:
You need to identify the cause of the error.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Review the available resources for Operation 10. Navigate to the Resource form and validate whether there is a calendar assigned
- B. Review the calendar for the resource to determine if it is expired.
- C. Review the resource group assigned to Operation 10. Check to see if there is a calendar assigned and if the calendar is expired.
- D. Navigate to the work calendar and view working times. Validate that there are working days created in the scheduled period.
Answer: A,B
NEW QUESTION 93
......
Microsoft Dynamics 365 Free Certification Exam Material from ActualVCE with 145 Questions: https://www.actualvce.com/Microsoft/MB-320-valid-vce-dumps.html
MB-320 Dumps Full Questions - Exam Study Guide: https://drive.google.com/open?id=1QIXijzU0S6Etx9z6LSs3CBlNaEeyfh1I