[Nov 15, 2021] Pass Juniper JN0-334 Exam Info and Free Practice Test
JN0-334 Exam Dumps PDF Updated Dump from ActualVCE Guaranteed Success
Subsequent Certification Path
The Juniper Networks JN0-334 exam is part of the Juniper Security certification path that confirms proficiency in the Juniper Networks technology. This path, in particular, targets individuals looking to demonstrate their mastery of security technologies with the Junos Software and for the SRX Series devices. Overall, such a track is meant for IT specialists willing to demonstrate their understanding of security technologies and related skills. On that note, the associate-level JNCIA-SEC certification will act as the prerequisite for obtaining the Juniper JNCIS-SEC certificate.
NEW QUESTION 24
You want to support reth LAG interfaces on a chassis cluster.
What must be enabled on the interconnecting switch to accomplish this task?
- A. swfab
- B. 802.3ad
- C. RSTP
- D. LLDP
Answer: B
NEW QUESTION 25
Click the Exhibit button.
You have configured your SRX Series device to receive authentication information from a JIMS server.
However, the SRX is not receiving any authentication information.
Referring to the exhibit, how would you solve the problem?
- A. Use the JIMS Administrator user interface to add the SRX device as client.
- B. Update the IP address of the JIMS server
- C. Change the SRX configuration to connect to the JIMS server using HTTP.
- D. Generate an access token on the SRX device that matches the access token on the JIMS server.
Answer: D
NEW QUESTION 26
Click the Exhibit button.
The output shown in the exhibit is displayed in which format?
- A. sd-syslog
- B. WELF
- C. syslog
- D. binary
Answer: A
NEW QUESTION 27
Which three features are parts of Juniper Networks' AppSecure suite? (Choose three.)
- A. AppQoS
- B. APBR
- C. Secure Application Manager
- D. AppQoE
- E. AppFormix
Answer: A,B,D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos/information-products/pathway-pages/security/security- application-identification.pdf
NEW QUESTION 28
You want to use Sky ATP to protect your network, however, company policy does not allow you to send any files to the cloud. Which Sky ATP feature should you use in this situation?
- A. Only use cloud-based Sky ATP file hash lookups
- B. Only use on-box SRX anti-malware file scanning
- C. Only use on-premises local Sky ATP server anti-malware file scanning.
- D. Only use cloud-based Sky ATP file blacklists.
Answer: D
NEW QUESTION 29
Click the Exhibit button.
You need to have the JATP solution analyzer .jar, .xls, and .doc files.
Referring to the exhibit, which two file types must be selected to accomplish this task? (Choose two.)
- A. library
- B. executable
https://www.juniper.net/documentation/en_US/release-independent/sky-atp/topics/reference/general/sky-atp-profile-overview.html - C. Java
- D. document
Answer: C,D
NEW QUESTION 30
Which two functions are performed by Juniper Identity Management Service (JIMS)? (Choose two.)
- A. JIMS collects and maintains a database of authentication information from Active Directory domains
- B. JIMS replicates Active Directory authentication information to non-trusted Active Directory domain controllers
- C. JIMS forwards Active Directory authentication information to SRX Series client devices.
- D. JIMS synchronizes Active Directory authentication information between a primary and secondary JIMS server
Answer: C,D
NEW QUESTION 31
Which solution should you use if you want to detect known attacks using signature-based methods?
- A. IPS
- B. ALDs
- C. JIMS
- D. SSL proxy
Answer: B
NEW QUESTION 32
The DNS ALG performs which three functions? (Choose three )
- A. The DNS ALG performs the IPv4 and IPv6 address transformations
- B. The DNS ALG modifies the DNS payload in NAT mode
- C. The DNS ALG performs DNS doctoring.
- D. The DNS ALG performs DNS load balancing
- E. The DNS ALG performs DNSSEC
Answer: A,C,D
NEW QUESTION 33
Exhibit.
You need to have the JATP solution analyze jar, xls, and doc files
Referring to the exhibit, which two file types must be selected to accomplish this task? (Choose two.)
- A. library
- B. executable
- C. Java
- D. document
Answer: C,D
NEW QUESTION 34
You are asked to convert two standalone SRX Series devices to a chassis cluster deployment. You must ensure that your IPsec tunnels will be compatibla with the new deployment.
In this scenario, which two interfaces should be used when binding your tunnel endpoints? (Choose two.)
- A. lo0
- B. pp0
- C. ge
- D. reth
Answer: C,D
NEW QUESTION 35
Exhibit.
Which two statements are true about the configuration shown in the exhibit? (Choose two )
- A. The session is removed from the session table after 10 milliseconds of inactivity.
- B. The session is removed from the session table after 10 seconds of inactivity.
- C. Aggressive aging is triggered if the session table reaches 95% capacity.
- D. Aggressive aging is triggered if the session table reaches 80% capacity
Answer: B
NEW QUESTION 36
You must block the lateral spread of Remote Administration Tools (RATs) that use SMB to propagate within the network, using the JATP solution.
Which action would accomplish this task?
- A. Configure YARA rules.
- B. Configure the SAML settings.
- C. Configure a new anti-virus configuration rule.
- D. Configure whitelist rules
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 37
Which three statements are correct about fabric interfaces on the SRX5800? (Choose three.)
- A. Fabric interfaces must be same interface type.
- B. Fabric interfaces must be user-assigned interfaces.
- C. Fabric interfaces must be system-assigned interfaces.
- D. Fabric interfaces must have a user-assigned IP address.
- E. Fabric interfaces must be on the same Layer 2 segment.
Answer: A,C,E
NEW QUESTION 38
Exhibit.
Referring to the SRX Series flow module diagram shown in the exhibit. where is IDP/IPS processed'
- A. Forwarding Lookup
- B. Services ALGs
- C. Security Policy
- D. Screens
Answer: B
NEW QUESTION 39
Exhibit.
The output shown in the exhibit is displayed in which format?
- A. OWELF
- B. syslog
- C. sd-syslog
- D. binary
Answer: D
NEW QUESTION 40
Click the Exhibit button.
You are trying to create a security policy on your SRX Series device that permits HTTP traffic from your private 172.25.11.0/24 subnet to the Internet. You create a policy named permit - http between the trust and untrust zones that permits HTTP traffic.
When you issue a commit command to apply the configuration changes, the commit fails with the error shown in the exhibit.
Which two actions would correct the error? (Choose two.)
- A. Modify the security policy to use the built-in junos-http application.
- B. Create a custom application named http at the [edit applications] hierarchy.
- C. Execute the Junos commit full command to override the error and apply the configuration.
- D. Issue the rollback 1command from the top of the configuration hierarchy and attempt the commit again.
Answer: A,C
NEW QUESTION 41
You are asked to enable AppTrack to monitor application traffic from hosts in the User zone destined to hosts in the Internet zone In this scenario, which statement is true?
- A. You must enable the AppTrack feature within the User zone configuration
- B. You must enable the AppTrack feature within the interface configuration associated with the User zone
- C. You must enable the AppTrack feature within the Internet zone configuration
- D. You must enable the AppTrack feature within the ingress interface configuration associated with the Internet zone
Answer: D
NEW QUESTION 42
Which statement describes the AppTrack module in AppSecure?
- A. The AppTrack module provides control by the routing of traffic, based on the application
- B. The AppTrack module provides visibility and volumetric reporting of application usage on the network
- C. The AppTrack module identifies the applications that are present in network traffic
- D. The AppTrack module provides enforcement with the ability to block traffic, based on specific applications
Answer: C
NEW QUESTION 43
Exhibit.
The output shown in the exhibit is displayed in which formal?
- A. syslog
- B. sd-syslog
- C. WELF
- D. binary
Answer: C
NEW QUESTION 44
Click the Exhibit button.
Referring to the exhibit, which action will be taken for traffic coming from the untrust zone going to the trust zone?
- A. Source address 2001:db8::8 will be translated to 10.1.1.8.
- B. Source address 2001:db8::8 will be translated to 10.1.1.5.
- C. Source address 10.1.1.8 will be translated to 2001:db8::8.
- D. Source address 10.1.1.5 will be translated to 2001:db8::8.
Answer: A
NEW QUESTION 45
......
Pass Your Juniper Exam with JN0-334 Exam Dumps: https://www.actualvce.com/Juniper/JN0-334-valid-vce-dumps.html