[Oct-2021] Updated Cisco 350-501 Dumps – PDF & Online Engine
350-501.pdf - Questions Answers PDF Sample Questions Reliable
How to Prepare for Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
Preparation Guide for Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
Introduction
Cisco Systems, Inc., located in San Jose, California, in the heart of Silicon Valley, is an American multinational technology corporation. Cisco designs produce and sell hardware, software, telecommunications equipment, and other high-tech services and products for networking. Cisco specializes in unique tech markets, such as the Internet of Things (IoT), domain security, and energy management, through its various acquired subsidiaries, such as OpenDNS, WebEx, Jabber, and Jasper.
Cisco has created a track for IT professionals to certify as a Cisco Video infrastructure on the Cisco platform. This certification program provides Cisco professionals a way to demonstrate their skills. The assessment is based on a rigorous exam using industry-standard methodology to determine whether a candidate meets Ciscoâs proficiency standards.
This exam guide is intended to help you determine if you can complete the Troubleshooting and Maintaining Cisco IP Networks 350-501 exam test successfully. This guide includes information on the certification test target audience, recommended preparation and documentation, and a full list of exam targets, all to help you obtain a passing grade. To increase your chances of passing the test, we highly recommend studying the 350-501 dumps.
NEW QUESTION 114
What do Ansible and Salt Stack have in common?
- A. They both use YAML configuration language
- B. They both can be designed with more than one master server
- C. They both have agents running on the client machine
- D. They both use DSL configuration language
Answer: B
NEW QUESTION 115
Which characteristic describes prefix segment identifier?
- A. it is locally unique.
- B. It Is globally unique.
- C. It contains a router to a neighbor.
- D. it contains the interface address of the device per each link.
Answer: B
NEW QUESTION 116
Refer to me exhibit.
A network operator recently configured BGP FlowSpec for me internal IT network What will be inferred from the configuration deployed on me network?
- A. The policy is warned via BC FlowSpec aid has active traffic
- B. The policy is configured locally on CSR1 and currently has no active traffic
- C. The policy is learned via BGP FlowSpec and drops all traffic for TCP ports 80 and 443
- D. The policy is configured locally on CSRl and drops all traffic for TCP ports 80 and 443
Answer: D
NEW QUESTION 117
Refer to the exhibit:
A network engineer is implementing a BGP routing policy.
Which effect of this configuration is true?
- A. All traffic that matches acl10 is allowed without any change to its local-preference
- B. All traffic is assigned a local-preference of 30O regardless of its destination
- C. All traffic that matches acl10 is dropped without any change to its local-preference
- D. If traffic matches acl10, it is allowed and its local-preference is set to 300
Answer: A
NEW QUESTION 118
Drag and drop the LDP features from the left onto their usages on the right.
Answer:
Explanation:
NEW QUESTION 119
What is the difference between SNMP and model-driven telemetry?
- A. Telemetry uses traps and inform messages to deliver data to a network administrator on a polling basis.
- B. SNMP pushes network data to the network administrator whenever it is queried.
- C. SNMP uses the YANG data modeling language.
- D. Telemetry allows for modeled network data to be pushed to the network administrator on an as-needed basis.
Answer: D
Explanation:
Section: Automation and Assurance
NEW QUESTION 120 
Refer to the exhibit. Which purpose of implementing NSF with this configuration is true?
- A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up.
- B. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds.
- C. The router uses NSF to load balance traffic on a routed EtherChannel.
- D. The router uses NSF to reduce neighbor-relationship downtime during RP switchover.
Answer: A
Explanation:
Section: Networking
NEW QUESTION 121
Refer to the exhibit:
Router R1 and its peer R2 reside on the same subnet in the network, If does it make connections to R27
- A. R1 establishes TCP connections that are authenticated with a clear-text password
- B. R1 establishes TCP connections that are authenticated with an MD5 password
- C. R1 establishes UDP connections that are authenticated with an MD5 password
- D. R1 establishes UDP connections that are authenticated with a clear-text password
Answer: B
NEW QUESTION 122
Refer to the exhibit:
What does the REST API command do?
- A. It retrieves the information requested by Descriptions xml
- B. It removes the information identified by Descriptions xml
- C. It displays the information identified by Descriptions xml
- D. It executes the commands specified in Descriptions xml
Answer: D
NEW QUESTION 123
Which configuration mode do you use to apply the mpls Idp graceful-restart command in IOS XE Software?
MPLS
- A. LDP neighbor
- B. interface
- C. MPLS
- D. global
Answer: D
NEW QUESTION 124
Which feature will an operator use while implementing MPLS TE on customer's network, to prevent an LSP from using any overseas inks?
- A. explicit path
- B. SLRG
- C. affinity
- D. bandwidth
Answer: A
NEW QUESTION 125
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. All traffic is dropped
- B. Router 1 and Router 2 advertise the route to 192.0.2.0/24 to all BGFD peers.
- C. Router 1 drops all traffic with a local-preference set to 150
- D. All traffic to 192.168.1.0/24 is dropped
Answer: D
NEW QUESTION 126
Refer to the exhibit:
Which effect of this configuration is true?
- A. R1 can failover only to a peer that is configured for LDP SSO/NSF
- B. R1 can failover to any peer
- C. R1 can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer
- D. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage
Answer: D
NEW QUESTION 127
Refer to the exhibit:
P3 and PE4 are at the edge of the service provider core and serve as ABR routers Aggregation areas are on either side of the core.
Which statement about the architecture is true?
- A. If each area is running its own IGP. the ABR routers must redistribute the IGP routing table into BGP
- B. To support seamless MPLS, the BGP route reflector feature must be disabled
- C. To support seamless MPLS. TDP must be used as the label protocol
- D. If each area is running its own IGP. BGP must provide an end-to-end MPLS LSP
Answer: D
NEW QUESTION 128
Which statement about Network Services Orchestrator (NSO) is true?
- A. It uses YANG modeling language to automate devices
- B. It must use SDN as an overlay for addressing
- C. It can be used only with XML coding
- D. It is used only in service provider environments
Answer: A
NEW QUESTION 129
Which statement about segment routing prefix segments is true?
- A. It requires using EIGRP to operate
- B. It is linked to a prefix SID that is globally unique within segment routing domain
- C. It is linked to an adjacency SID that is globally unique within the router
- D. It is the longest path to a node
Answer: C
NEW QUESTION 130
Refer to the exhibit. An engineer is preparing to implement data plane security configurating. What os the result of this configuration?
- A. Router 2 is the router receiving the DDoS attack.
- B. Router 1 must be configured with uRPF for the RTBH Implementation to be effective.
- C. Router 2 must configure a route to nul 0 for network 192.108.1.0/24 for the RTBH implementation to be complete.
- D. Router 1 is the trigger router in a RTBH Implementation.
Answer: D
NEW QUESTION 131 
Refer to the exhibit. If the NetFlow configuration is updated to version 9, which additional piece of information can be reported?
- A. IPv4 flow information
- B. BGP AS information
- C. IPv6 flow information
- D. flow sequence numbers
Answer: C
Explanation:
Section: Automation and Assurance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/12-2sx/ipv6-12-2sx-book/ip6- netflow.html
NEW QUESTION 132
What is the role of NSO in network automation?
- A. It Is a type of REST API used to configure an APIC.
- B. It is a tool that uses CLl only to configure virtual network devices.
- C. It is GUI used to manage wireless devices in a campus infrastructure.
- D. It is a tool used to bridge automation to the physical network infrastructure.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-services-orchestrator/datasheet-c78-734576.html
NEW QUESTION 133
Refer to the exhibit.
Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
- A. Router 1 to be an ABR
- B. the hello timers on Router 1 and Router 2 to be different
- C. the area numbers on Router 1 and Router 2 to be similar
- D. the wildcard mask network statement in OSPF of Router 2
Answer: C
NEW QUESTION 134
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. Router 2 is the router receiving the DDoS attack
- B. Router 1 is the trigger router in a RTBH implementation.
- C. Router 2 must configure a route to null 0 for network 192 168.1 0/24 for the RTBH implementation to be complete.
- D. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
Answer: C
NEW QUESTION 135
You are writing an RPL scnpt to accept routes only from certain autonomous systems Consider this code.
If you apply this code to BGP filters, which effect does the code have on your router?
- A. denies routes from AS 7007
- B. allows routes from AS 7077
- C. denies routes from AS 7070
- D. allows routes from AS 770
Answer: B
NEW QUESTION 136
Refer to the exhibit:
A network operator working for service provider with an employee id 3715 15:021 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
- A. Enable MPLS LDP on the interface
- B. Disable Cisco Express Forwarding globally
- C. Delete the static router ID
- D. Configure the both keyword to enable LDP globally
Answer: A
NEW QUESTION 137
......
Cisco 350-501 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
| Topic 16 |
|
| Topic 17 |
|
| Topic 18 |
|
| Topic 19 |
|
| Topic 20 |
|
| Topic 21 |
|
| Topic 22 |
|
Cisco 350-501 Dumps PDF Are going to be The Best Score: https://www.actualvce.com/Cisco/350-501-valid-vce-dumps.html
CCNP Service Provider 350-501 Exam and Certification Test Engine: https://drive.google.com/open?id=1v2M26K-ljrYzZeDBeq45DyAnKCDnwLXO