Prepare 71301T Exam Questions [2026] Recently Updated Questions
Give push to your success with 71301T exam questions
NEW QUESTION # 42
When registering as a Remote Worker via the Avaya Session Border Controller for Enterprise (ASBCE), which IP address should be configured in the Server List of the Avaya one-X Communicator?
- A. The Avaya Aura Session Manager (SM) Security Module IP Address
- B. ASBCE Internal (Private) Interface IP address allocated for Remote Workers
- C. ASBCE External (Public) Interface IP address allocated for Remote Workers
- D. Avaya Aura Session Manager (SM) External (Public) Interface IP address allocated for Remote Workers
Answer: C
Explanation:
When a user is working remotely (outside the corporate network), their client cannot "see" the internal Avaya Aura infrastructure directly. The Avaya Session Border Controller for Enterprise (ASBCE) serves as the secure entry point.
Public Visibility: The Remote Worker's device (such as Avaya one-X Communicator) must point to a reachable IP address on the public internet. This is the External (Public) Interface of the ASBCE.
The Relay Mechanism: Once the client sends its registration request to the ASBCE's public IP, the ASBCE performs NAT (Network Address Translation) and security checks before relaying that signaling to the internal Session Manager.
Security: By using the ASBCE External IP, the internal topology (like the Session Manager's actual IP) remains hidden from the public internet, protecting the core of the Avaya Aura network from direct attacks.
NEW QUESTION # 43
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
- B. It is a W3C specification that allows cross-domain communication from the browser.
- C. It allows for signaling-groups to be used by more than one trunk-group.
- D. It is making DSP resources available regardless of the originating location of a call.
Answer: B
Explanation:
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g.
fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross- Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION # 44
An Avaya Aura Messaging (AAM) server intended to store Voice Messages in Avaya Message Store Mode, and you are configuring that server for integration with an Avaya Aura Core. In Messaging Administration > Server Settings > Server Role/AxC Address, which Server Role must be chosen at the "Roles for this server" field?
- A. Storage Only
- B. Storage & Application
- C. AMSM
- D. Application Only
Answer: B
NEW QUESTION # 45
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura Communication Manager (CM)? (Choose four.)
- A. controlling specific calls or stations
- B. invoking CM features
- C. adding new feature buttons to agent sets
- D. receiving notifications of events
- E. performing a remote reboot to the CM server
- F. completing the routing of incoming calls
Answer: A,B,D,F
Explanation:
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are:
placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
https://downloads.avaya.com/css/P8/documents/100141354
NEW QUESTION # 46
The Avaya WebRTC solution uses the web intensively to make media calls from a standard web browser in the internet, into internal and secure communication premises in the enterprise. Which statement about security between the Enterprise-edge and those standard Web browsers in the internet is true?
- A. A trust relationship based on certificates must be built to make WebRTC work.
- B. There must be a VPN connection between the Web Browser and the Enterprise-edge to build a WebRTC link.
- C. WebRTC only works within the Enterprise network. External Web Browsers must connect through an Avaya Session Border Controller for Enterprise (SBCE) via a SIP trunk.
- D. No trust relationship exists between enterprise edge security and web browsers; therefore, the security strategy is based on an Authorization Token instead.
Answer: D
Explanation:
Validation of the authorization token.
The WebRTC Snap-in will validate the authorization token created and encrypted by the web server. If the snap-in can decrypt the token and ensure that the time stamp is valid, it knows that the incoming HTTP request is valid. The time stamp will usually be short lived; on the order of 5-
10seconds to protect against reply attacks.
NEW QUESTION # 47
Which two pieces of information in an output from the show mgc command (issued on a G430/G450 Gateway CLI), indicate that the G430/G450 is operating as an Internet Friendly (EdgE) Gateway as opposed tan Enterprise Gateway? (Choose two.)
- A. The Management Link Mode displays Tunnelled.
- B. The H.248 Link Mode displays IFG.
- C. The Gateway Mode displays Edge.
- D. The Controller displays sbc@.
- E. The H.248 Link Status displays UP/Encrypted.
Answer: B,C
Explanation:
When a G430 or G450 gateway is configured to function in an Internet-friendly capacity (often used for remote branch deployments where traffic traverses public networks), the command-line interface provides explicit status indicators for this mode:
Gateway Mode (Edge): This field confirms the global operational state of the gateway. When set to Edge, the gateway is configured to interact with the Session Border Controller (SBC) or the appropriate edge-aware media server components, rather than acting as a standard Enterprise gateway.
H.248 Link Mode (IFG): The IFG indicator stands for Internet Friendly Gateway. This specifically confirms that the H.248 signaling control link is operating in a mode optimized for traversing NATs or firewalls, ensuring connectivity back to the main site controller.
NEW QUESTION # 48
The customer plans to have 50 SIP Trunks and 100 Remote Workers supported by the Avaya Session Border Controller for Enterprise (ASBCE).
How many ASBCE licenses will they require?
- A. 50 standard services licenses, and 100 advanced services licenses
- B. 150 standard services licenses, and 150 advanced services licenses
- C. 150 standard services licenses
- D. 150 standard services licenses, and 100 advanced services licenses
Answer: D
Explanation:
The Avaya Session Border Controller for Enterprise (ASBCE) licensing model is designed to account for the different types of workloads being processed by the SBC.
Standard Services Licenses: These are required for every session passing through the ASBCE, regardless of whether it is a SIP Trunk session or a Remote Worker session.
50 SIP Trunks + 100 Remote Workers = 150 total sessions, thus requiring 150 standard services licenses.
Advanced Services Licenses: These are required specifically for Remote Worker sessions to enable advanced features like WebRTC, media anchoring, and specific security features that aren't typically required for standard SIP trunking.
Since there are 100 Remote Workers, the customer requires 100 advanced services licenses.
NEW QUESTION # 49
Which CLI tool is used to trace messages in real-time as they pass through the Avaya Session Border Controller for Enterprise (ASBCE)?
- A. tracesbc
- B. tracePackets
- C. SIPtracer start
- D. start trace
Answer: A
Explanation:
The tracesbc CLI tool traces SIP messages in real-time as they pass through the ASBCE, parsing log files to display SIP and PPM traffic with filtering and export options.
NEW QUESTION # 50
The media stream in WebRTC is anchored on which Avaya Aura component?
- A. Avaya Aura Media Gateway G430/G450
- B. No DSP Resources are required
- C. G650 Medpro
- D. Avaya Aura Media Server (AAMS)
Answer: D
Explanation:
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls. The WebRTC Snap-in supports 1800 simultaneous calls at a rate of 28,000 BHCC in the following deployment model:
1 Avaya Breeze server
1 Avaya Session Border Controller for Enterprise (Avaya SBCE) server
8 Avaya Aura Media Servers
NEW QUESTION # 51
When installing a new Avaya Session Border Controller for Enterprise (ASBCE) component / device using the EMS GUI, you click on the Install link on the EMS Device Management page.
After briefly displaying the Provisioned status, which final status should the ASBCE component / device display?
- A. Active
- B. Running
- C. Up
- D. Commissioned
Answer: D
NEW QUESTION # 52
After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls. What would you do first to resolve the issue?
- A. Reboot SBCE.
- B. Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.
- C. Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.
- D. Restart Applications.
Answer: B
Explanation:
1. The interface might need to be enabled.
2. Click on the Interface Configuration tab.
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled
NEW QUESTION # 53
To log on the one-X Communicator to Avaya Aura Presence Services server, what do you enter in the IM and Presence / Server field of the one-X Communicator?
- A. the SM100 IP-Address of FQDN of Avaya Aura Session Manager (SM)
- B. the management IP-Address of FQDN of Avaya BreezeTM server
- C. the management IP-Address of FQDN of Avaya Aura Session Manager (SM)
- D. the SM100 IP-Address or FQDN of Avaya BreezeTM server
Answer: A
Explanation:
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
NEW QUESTION # 54
In Avaya Aura Messaging 6.3, which statement is true about Avaya Aura Messaging (AAM) capacities of a system utilizing the Standard Capacity (non-High Capacity) Message Store template?
- A. One Message Store Server supports up to 60000 user mailboxes and you can have 5 active + 1 Redundant Application Servers in a cluster.
- B. One Message Store Server supports up to 6000 user mailboxes and you can have 3 active + 1 Redundant Application Servers in a cluster.
- C. One Message Store Server supports up to 1000 user mailboxes and you can have 3 active + 1 Redundant Application Servers in a cluster.
- D. One Message Store Server supports up to 600 user mailboxes and you can have 5 active + 1 Redundant Application Servers in a cluster.
Answer: B
Explanation:
Dedicated AxC/Directory server: A physical server that manages notification capabilities and the LDAP database and provides communications between application servers and the thirdparty storage server. This server also stores user properties and name and greeting recordings.
Not all configurations require a dedicated AxC/Directory server because the AxC/Directory role runs on the Avaya-provided message store.
You only need a dedicated AxC/Directory server for:
* Release 6.2 and earlier Messaging systems with a third-party storage server.
* Release 6.3 or later systems with more than one application server, or more than 6000 users using a third-party storage server, such as Microsoft Exchange.
third-party storage server, such as Microsoft Exchange.
https://downloads.avaya.com/css/P8/documents/101004642
NEW QUESTION # 55
From a remote worker's SIP Endpoint connected via Mobile Workspace, which tool is used to trace the successful way through Avaya Session Border Controller for Enterprise (SBCE) of an Invite message?
- A. traceSM
- B. traceSBC
- C. traceMW
- D. traceRT
Answer: B
NEW QUESTION # 56
How many Server Flows and/or Subscriber Flows are required for SIP Trunking?
- A. one Subscriber Flow and one Server Flow
- B. one Subscriber Flow and two Server Flows
- C. a minimum of two Subscriber Flows
- D. a minimum of two Server Flows
Answer: B
Explanation:
Two types of flows need to be defined for the proper routing of SIP messages from and to the endpoints and the SIP server.
Example, Server Flows:
NEW QUESTION # 57
In Avaya Session Border Controller for Enterprise (SBCE), what is the default state of an Interface?
- A. Active
- B. Deployed
- C. Enabled
- D. Disabled
Answer: D
Explanation:
Example:
Commission the SBC-SBC Configuration
1. The A1 and B1 interfaces display on the Network Configuration tab.
2. Click on the Interface Configuration tab:
3. Click the Toggle link for both the A1 and the B1 interfaces. The Administrative Status for both A1 and B1 changes to Enabled.
NEW QUESTION # 58
Which two options describe the purpose of TraceSM in the Avaya Aura Presence Services?
(Choose two.)
- A. It captures Voice and Video Calls media packets in real-time.
- B. It captures live traces for both SIP and H323/XMPP clients.
- C. It captures Packet-Size statistics from every telephone call in Avaya Aura 7.
- D. It captures real-time XMPP traffic.
- E. It captures Contact details from every user connected to Avaya Aura Presence Services.
Answer: B,D
Explanation:
It's important to know that traceSM is a real-time capture tool.
traceSM is an interactive perl script that allows an administrator to capture, view, and save call processing activity on a Session Manager. While not as powerful or versatile as wireshark, traceSM is absolutely essential when it comes to working with Avaya SIP. First off, it allows you to view SIP messages even if they have been encrypted with TLS.
https://andrewjprokop.wordpress.com/2014/06/02/a-necessary-guide-to-the-avaya-tracesm-utility/
NEW QUESTION # 59
Which configuration mechanism allows an administered group of snap-ins to be invoked in a specified order?
- A. Service Profile Administration
- B. Implicit User Profile Administration
- C. Vector Administration
- D. Cluster Administration
Answer: A
Explanation:
In the Avaya Breeze environment, Service Profile Administration is the mechanism used to define and sequence snap-ins for specific users or endpoints.
Ordering: When you create a Service Profile, you can group multiple snap-ins and define the execution order in which they are invoked. This ensures that features (such as security filters, call recording, or Presence services) are processed in the correct sequence as a request moves through the platform.
Application: Once a Service Profile is created and ordered, it is assigned to specific users or devices. When a request from that user hits the Breeze server, the platform consults the associated Service Profile to determine the invocation sequence of the snap-ins.
NEW QUESTION # 60
To set Timers, URI Manipulation, and Header Manipulation that the Avaya Session Border Controller for Enterprise (SBCE) will use when signaling to the far-end server; a profile like
"avaya-ru" is provided by default.
When configuring the Server Configuration, you must link to which type of Global profile?
- A. Server Interworking
- B. Topology Hiding
- C. Routing
- D. Signaling
Answer: A
Explanation:
The standard Avaya profile "avaya-ru" is cloned for the Call Server Interworking Profile.
The Interworking function of the Global Profiles feature enables the SBCE to function in an enterprise VoIP network using different SIP protocols.
NEW QUESTION # 61
A field engineer runs the Installation Wizard to install the Avaya Session Border Controller for Enterprise (SBCE). Which statement about the Domain Name Service (DNS) configuration is true?
- A. A DNS address should not be configured here.
- B. A DNS address does not need to be configured.
- C. A DNS address always needs to be configured for both the Primary and Secondary DNS, even if only the DNS is available.
- D. A DNS address needs to be configured, even if it is unused and/or unreachable.
Answer: D
Explanation:
The system requires the DNS server to resolve the host names for alarming and remote access name associated with the Avaya Service Center. You must supply a DNS address entry, even if it is unused and/or unreachable.
NEW QUESTION # 62
......
Get 71301T Actual Free Exam Q&As to Prepare Certification: https://www.actualvce.com/AVAYA/71301T-valid-vce-dumps.html
71301T 100% Guarantee Download 71301T Exam PDF Q&A: https://drive.google.com/open?id=1pBgKg767AM5k34ZgVZUYwWqZT2lN-IdF