Use Real VMCE2020 - 100% Cover Real Exam Questions [Oct-2021]
Dumps Brief Outline Of The VMCE2020 Exam - ActualVCE
NEW QUESTION 17
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Data does not exist
- B. Raw data every 20 seconds
- C. Aggregated data every five minutes
- D. Aggregated data every two hours
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION 18
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs. What could be the reason?
(Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
- C. Jobs are configured as per VM and these particular VM's need more fulls
- D. The VMs were moved to different datastores manually
- E. The VM is in a backup chain and trapped inside a single retention file
Answer: C,D
NEW QUESTION 19
A customer has a physical proxy configured for Direct Storage Access without failover to network mode.
The backup fails. What could be the issue?
- A. One or more of the VM disk(s) are on Wols
- B. The datastores are properly zoned and exposed to the proxy server but in read-only mode
- C. The disks being processed are IDE and/or SATA
- D. The storage is not added into the storage infrastructure, inside the backup and replication console
- E. Write access has not been enabled on the SAN
Answer: E
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/vsphere/direct_san_access.html?ver=100
NEW QUESTION 20
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?
- A. In the reporter portal in the dashboards tab, VM performance dashboard
- B. In the monitor client under the infrastructure view
- C. In the reporter portal in the workspace tab, VM performance
- D. In the monitor client under the data protection view
Answer: D
NEW QUESTION 21
A company is required to have a daily backup with a retention of at least six weeks. The backups are running every eight hours during the day. From the options provided, what backup job would you advise based on their SLA and best practices?
- A. Forever forward incremental backup, with a retention of 42 restore points, savings six weekly full backups
- B. Forever forward incremental backup, with a retention of 42 restore points
- C. Forever forward incremental backup, with default job settings enabled
- D. Forward incremental backup with weekly synthetic full backups and a retention of 42 days
Answer: C
NEW QUESTION 22
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?
- A. Add the file share into the store infrastructure
- B. Add the file share into the managed servers
- C. Add the file share into the physical infrastructure
- D. Add the file share into the inventory
Answer: B
NEW QUESTION 23
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- B. Use backup jobs to back up directly to tape; ship the tapes off site
- C. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 24
What transport mode does the Linux backup proxy support?
- A. Virtual appliance
- B. Direct storage access
- C. Automatic
- D. Network
Answer: A
NEW QUESTION 25
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. Perform failback to VM within the same subnet
- B. The VM replica must have access to the repository where the full backup of the VM resides
- C. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- D. Indexing must be enabled for the original VM
Answer: C
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/vsphere/failback_quick_rollback.html?ver=100
NEW QUESTION 26
A backup administrator needs to restore two data drives to a VM where the operating system remains intact.
The target machine must remain powered on. What recovery option is most appropriate to perform this operation?
- A. Restore VM files
- B. Instant VM Recovery
- C. Restore entire VM
- D. Instant disk recovery
Answer: B
NEW QUESTION 27
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
- B. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- C. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- D. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
Answer: B
NEW QUESTION 28
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. The old restore points will be deleted after the new restore chain meets the retention policy
- B. The other restore points are weekly full backups, this is expected
- C. Per VM backup files are enabled in the repository
- D. You should configure the synthetic full backup to be performed on Mondays instead
Answer: B
NEW QUESTION 29
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs. What could be the reason? (Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
- C. Jobs are configured as per VM and these particular VM's need more fulls
- D. The VMs were moved to different datastores manually
- E. The VM is in a backup chain and trapped inside a single retention file
Answer: C,D
NEW QUESTION 30
Select the correct description of a synthetic full backup.
- A. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- B. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
- C. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
Answer: A
Explanation:
Explanation
NEW QUESTION 31
A company needs to maintain and verify backups at a secondary site to meet the following requirements:
RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
- B. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
- C. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
- D. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
Answer: A
NEW QUESTION 32
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- B. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- C. If a VM within the replication job is not mapped, the job will fail
- D. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
Answer: D
NEW QUESTION 33
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- B. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- C. If a VM within the replication job is not mapped, the job will fail
- D. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
Answer: D
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 34
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a backup copy job in mirror mode, to a repository on the second site
- B. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
- C. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- D. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
Answer: A
NEW QUESTION 35
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site. When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company's disaster recovery site.
- A. Mission-critical VMs: RPO = 24 hours, RTO = four hours; business-important VMs: RPO = 24 hours, RTO = four hours
- B. Mission-critical VMs: RPO = 60 minutes, RTO = one hour; business-important VMs: RPO = 60 minutes, RTO = four hours
- C. Mission-critical VMs: RPO = 60 minutes, RTO = 20 minutes; business-important VMs: RPO = 24 hours, RTO = four hours
- D. Mission-critical VMs: RPO = 24 hours, RTO = 20 minutes; business-important VMs: RPO = 24 hours, RTO = four hours
Answer: B
NEW QUESTION 36
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?
- A. In the reporter portal in the dashboards tab, VM performance dashboard
- B. In the monitor client under the infrastructure view
- C. In the reporter portal in the workspace tab, VM performance
- D. In the monitor client under the data protection view
Answer: D
Explanation:
Explanation/Reference: https://www.veeam.com/blog/monitoring-vmware-hyperv-environment.html
NEW QUESTION 37
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m.
and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 1 a.m. to 7 a.m.
- B. Data from 8 a.m. to 2 p.m.
- C. Data from 1 a.m. to 2 p.m.
- D. Data from 7 a.m. to 8 a.m.
Answer: C
NEW QUESTION 38
An end user has deleted a business-critical document and they need it back right away. The IT team has been doing hypervisor-level backups of the VM that the document was on. What is the fastest option for this backup administrator to get the user's document back?
- A. Virtual disks restore
- B. Instant VM Recovery
- C. Guest files restore
- D. Entire VM restore
Answer: D
NEW QUESTION 39
A financial company is looking for a new backup application. One of their main requirements is the ability to have quick access to their backup data. What features in Veeam Backup & Replication support the rapid availability of data, applications and VMs? (Choose three.)
- A. Microsoft SQL database, and Oracle database publishing
- B. Instant VM Recovery
- C. Restore to Amazon EC2
- D. Full VM recovery without quick rollback
- E. Bare metal recovery
- F. Instant VM disk recovery
Answer: A,B,F
NEW QUESTION 40
......
Certification Training for VMCE2020 Exam Dumps Test Engine: https://www.actualvce.com/Veeam/VMCE2020-valid-vce-dumps.html