[Sep 11, 2021] Get Free Updates Up to 365 days On Developing NS0-520 Braindumps
Best Quality Network Appliance NS0-520 Exam Questions
NEW QUESTION 32
Click the Exhibit button.
You have an existing legacy Fibre Channel SAN environment and have deployed an ONTAP AFF A800 cluster. You are planning to migrate a NetApp Foreign LUN Import using the existing SAN environment.
Referring to the exhibit, how must the UTA2 ports be configured?
- A. Configure the FCP to target mode.
- B. Configure the FCP to initiator mode.
- C. Configure the CNA to target mode.
- D. Configure the CNA to initiator mode.
Answer: B
NEW QUESTION 33
An administrator suspects abnormal operation and performance-related issues within a particular SAN environment. The administrator wants to further investigate the environment in terms of overall health, best practice recommendations, proactive remediation, and risk assessments, as compared to other SAN deployments.
Which tool should the administrator use to assess this information?
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. Interoperability Matrix Tool (IMT)
- D. Active IQ
Answer: B
NEW QUESTION 34
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. AutoSupport OnDemand
- B. OneCollect
- C. Perfstat
- D. Upgrade Advisor
Answer: D
NEW QUESTION 35
Click the Exhibit button.
You have an 8-node AFF A800 ONTAP 9.7 cluster. You have sixteen SVMs that serve NVMe namespaces using two 32 Gb FC ports per AFF A800 controller.
Referring to the exhibit, what is the maximum number of NVMe data LIFs that are supported on this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 36
Which two SAN components are inventoried by Active IQ OneCollect? (Choose two.)
- A. power supply
- B. storage controller
- C. FC switches
- D. fans
Answer: B,C
NEW QUESTION 37
You have a 2-node AFF A400 serving FC LUNs. You are asked to make an instant-writable copy of a LUN in a deduplicated volume. The writable copy must not take additional space.
In this scenario, which two ONTAP features would be used? (Choose two.)
- A. file clone
- B. clone split
- C. volume clone
- D. LUN move
Answer: A,C
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, which WWPN would you add to a zone set to provide access to a LUN hosted in ONTAP?
- A. 10:00:00:00:c9:43:f2:9e
- B. 20:00:00:00:c9:43:f2:9e
- C. 50:0a:09:81:87:09:3d:96
- D. 20:lb:00:a0:98:13:d5:d4
Answer: A
NEW QUESTION 39
You are called to help with a new customer's SAN environment that consists of an 8-node AFF A700 cluster, Cisco MDS fabric switches, and Cisco UCS servers.
Which two tools would help you to assess the environment? (Choose two.)
- A. Active IQ OneCollect
- B. Brocade SAN Health
- C. Active IQ Upgrade Advisor
- D. NetApp ONTAP Mediator
Answer: A,C
NEW QUESTION 40
You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)
- A. Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
- B. Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.
- C. Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
- D. Add NetApp WWN initiator ports to the existing zones.
Answer: A,C
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, you need to reduce the number of paths from the host to the LUNs.
Which three would reduce the number of paths? (Choose three.)
- A. port sets
- B. switch zoning
- C. ALUA
- D. Selective LUN Map (SLM)
- E. Asymmetric Namespace Access (ANA)
Answer: A,B,D
NEW QUESTION 42
An administrator wants to connect a DS460C disk shelf to a FAS9000.
Which two statements are correct in this scenario? (Choose two.)
- A. A deep rack is required
- B. A Telco rack is required
- C. A C13/C14 power cable and compatible rack power distribution unit are required.
- D. A C19/C20 power cable and compatible rack power distribution unit are required.
Answer: A,D
NEW QUESTION 43
You are adding a new AFF A220 FIA pair to an existing FlexPod infrastructure that is using a pair of Nexus 9332PX switches. Due to rack space constraints, the AFF A220 is to be installed in an adjoining rack, and the distance from the back of the AFF A220 to the Nexus 9332PX switches is nine meters.
In this scenario, which 10Gbe cabling solution would you use to connect the AFF A220 to the Nexus 9332PX switches?
- A. LC/LC OM4 optical
- B. active Twinax
- C. passive Twinax
- D. mini SAS
Answer: A
NEW QUESTION 44
You have 20 hosts, each with a single connection to one FC target port of an ONTAP HA pair. Each initiator is configured to limit the number of SCSI commands to 64 for each initiator-target connection. You plan to add 20 more hosts with the same number of connections.
In this scenario, how should you configure the queue depth limit?
- A. The sum of all hosts' queue depths per each target port should be less than or equal to 2048.
- B. Each host's queue depth should be set to 64.
- C. Each host's queue depth should be set to 128.
- D. The sum of all hosts' queue depths per each target port should be less than or equal to 4096.
Answer: A
NEW QUESTION 45
Click the Exhibit button.
You have three Linux hosts that are FC multipath connected to an AFF All SAN Array A700. A failover test is performed by shutting down both Fabric A and N2, as shown in the exhibit.
Referring to this exhibit, what happens to the remaining paths from the Linux hosts to the ASA A700 target?
- A. All paths are active-optimized (AO).
- B. Half of the paths are active-non-optimized (ANO) and the other half are active-optimized (AO).
- C. All paths are active-non-optimized (ANO).
- D. All paths go offline from the double failure of the switch and node.
Answer: A
NEW QUESTION 46
Click the Exhibit button.
An administrator has added two nodes to an existing cluster. The administrator created the svfc2 SVM to use FC to present LUNs to hosts. The hosts are unable to see the LUNs that have been presented to them.
Referring to the exhibit, what is the problem?
- A. The FC protocol needs to be added to the allowed protocols list.
- B. The UTA mode change Is pending a reboot.
- C. The FC ports show the status of admin down.
- D. The FC service on the SVM has been stopped.
Answer: B
NEW QUESTION 47
An additional LUN is required to be created and attached to an existing VMware ESXi environment. You are asked by a VMware administrator what NetApp software would validate multi-path connections to a newly presented FC LUN.
In this scenario, which NetApp software is required?
- A. You must install the NetApp VSC.
- B. You must install Active IQ Config Advisor.
- C. You must install Active IQ OneCollect.
- D. You must Install the DSM onto the virtual machine.
Answer: A
NEW QUESTION 48
Click the Exhibit button.
An administrator enabled the FC protocol on an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Referring to the exhibit, which two steps must the administrator take to solve this problem? (Choose two.)
- A. Disable NPIV on the switch.
- B. Create an igroup, add the iSCSI IQN, and then map the igroup to the LUN.
- C. Enable NPIV on the switch.
- D. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
Answer: C,D
NEW QUESTION 49
An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.
After rehosting the volume, what are two policies that must be reconfigured? (Choose two.)
- A. caching policy
- B. snapshot policy
- C. export policy
- D. volume efficiency policy
Answer: B,D
NEW QUESTION 50
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server.
After the administrator performs a rescan, the LUN is not visible on the host.
Which statement describes how to solve this problem?
- A. Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.
- B. Create an igroup, add the iSCSI IQN, then map the LUN to the igroup.
- C. Perform a takeover/giveback of the controller that is hosting the LUN.
- D. Enable ALUA support on the VMware host.
Answer: B
NEW QUESTION 51
......
Network Appliance Exam Practice Test To Gain Brilliante Result: https://www.actualvce.com/NetworkAppliance/NS0-520-valid-vce-dumps.html