Updated Nov-2022 100% Cover Real CPIM Exam Questions Make Sure You 100% Pass
CPIM dumps Accurate Questions and Answers with Free and Fast Updates
NEW QUESTION 159
Calculated or rated capacity is based on:
- A. available time, utilization and efficiency
- B. finite time, recovery and production
- C. available time, resources and efficiency
- D. rated capacity time, utilization and production
Answer: A
NEW QUESTION 160
A tool may shift, a gauge may move, a machine may wear, or an operator may make a mistake, there is a specific reason for these causes of variation, which is called:
- A. Flexible variation
- B. Transferable variation
- C. Assignable variation
- D. Convertible variation
Answer: C
NEW QUESTION 161
Identify the problem, generate ideas about main causes of problem, brainstorm all possible causes for each main cause and try to identify the most likely root cause are all the steps of:
- A. Pareto diagram
- B. Component diagram
- C. Schematic of a process
- D. Cause-and-effect diagram
Answer: D
NEW QUESTION 162
The inputs needed for a capacity requirement plan are open shop orders, planned order releases, routings, time standards and work center capacities, this all information can be obtained from:
- A. Routing file
- B. Material Requirements Plan
- C. All of the above
- D. Open order file
Answer: C
NEW QUESTION 163
The files contained in the database are of two types which are:
- A. fixed and variable
- B. absolute and relative
- C. planning and control
- D. planning and procedural
Answer: C
NEW QUESTION 164
The following four jobs, A-D, have critical ratios of 1.6, 1.2, 0.3, and 0.4 respectively. When this rule is utilizing for dispatching, what is the sequence of job execution?
- A. D, A, B, C
- B. C, D, B, A
- C. D, C, B, A
- D. A, B, C, D
Answer: D
NEW QUESTION 165
The planning horizon is usually and is reviewed perhaps .
- A. 5-8 months, each quarter
- B. None of these
- C. 6-8 months, each month or quarter
- D. 8-12 months, each month
Answer: C
NEW QUESTION 166
A manufacturer has the alternative of making parts in-house or of buying them from an outside supplier. Reason/s to buy out may be:
- A. Allows the firm to concentrate on its own areas of specialization
- B. Requires less capital investment
- C. All of these
- D. Uses specialized expertise of suppliers
Answer: C
NEW QUESTION 167
On the overage a company has 12week of work-in-process (WIP) inventory and annual cost of goods sold of 36$ million. Assuming the company works 50 weeks per year.
What is the dollar value of the WIP?
- A. $4, 22,000
- B. $4, 33,000
- C. $423,000
- D. $4, 32,000
Answer: D
NEW QUESTION 168
If the opening inventory is 400 units, demand is 900 units, and production is 800 units, what will be the ending inventory?
- A. 400 units
- B. 300 units
- C. 350 units
- D. 200 units
Answer: B
NEW QUESTION 169
The formula for the seasonal demand is:
- A. Seasonal demand = (seasonal index) - (deseasonalized demand)
- B. Seasonal demand = (seasonal index) / (deseasonalized demand)
- C. Seasonal demand = (seasonal index) * (deseasonalized demand)
- D. Seasonal demand = (seasonal index) + (seasonalized demand)
Answer: C
NEW QUESTION 170
If the units are discrete, such as automobiles, flow manufacturing is called:
- A. Continuous manufacturing
- B. Repetitive manufacturing
- C. Fixed manufacturing
- D. None of the above
Answer: B
NEW QUESTION 171
is the amount of work that can be done in a specified time period.
- A. Role
- B. Size
- C. Capacity
- D. Scope
Answer: C
NEW QUESTION 172
Goods or services satisfy the needs and expectations of the user, this refers to:
- A. Quality
- B. Maintainability
- C. Reliability
- D. Stability
Answer: A
NEW QUESTION 173
A tracking signal can be used to monitor the quality of forecast.
- A. True
- B. False
Answer: A
NEW QUESTION 174
Planning bills are used to:
- A. Master production scheduling
- B. All of the above
- C. Material requirements planning
- D. Simplify forecasting
Answer: B
NEW QUESTION 175
In the above question, if the work-in-process could be reduced to 7 weeks and the annual cost of carrying inventory was 20% of the inventory value, what would be annual saving?
- A. $ 60,000
- B. $ 70,000
- C. $ 80,000
- D. $ 90,000
Answer: D
NEW QUESTION 176
The purchase cost of the stock-keeping units or the cost of manufacturing the item is called:
- A. Elementary cost
- B. Economic cost
- C. Key cost
- D. Unit cost
Answer: D
NEW QUESTION 177
Pareto analysis can be used:
- A. to identify process bottleneck
- B. To manage excessive overtime
- C. To locate employee grievances with true assignable causes
- D. to select problems with the greatest economic impact
Answer: D
NEW QUESTION 178
Which statement is best as it relates to PROTECTIVE CAPACITY?
- A. The capabilities of a system constraint
- B. capacity that should always be utilized
- C. extra capacity used to protect against fluctuations in demand from the system constraint.
- D. the capabilities of the gateway workcenter
Answer: C
NEW QUESTION 179
The order picker circulates throughout the warehouse selecting the items on the order through:
- A. Managing system
- B. Zone system
- C. Area system
- D. Pick and choose system
Answer: C
NEW QUESTION 180
Which of the following points are related to bills of material?
- A. Each part or item has only one part number
- B. All of the above
- C. A part is defined by its form, fit or function. if any of these changes , then it is not the same part and it must have a different part number
- D. The bill of material shows all the parts required to make one of the items
Answer: B
NEW QUESTION 181
......
Real CPIM Quesions Pass Certification Exams Easily: https://www.actualvce.com/APICS/CPIM-valid-vce-dumps.html