[Apr 18, 2024] NSE6_FWF-6.4 Test Prep Training Practice Exam Questions Practice Tests
Exam Questions Answers Braindumps NSE6_FWF-6.4 Exam Dumps PDF Questions
The Fortinet NSE6_FWF-6.4 exam covers a wide range of topics related to wireless security, including wireless network architecture, deployment and configuration of wireless access points, authentication and authorization, and wireless intrusion prevention. It also covers advanced topics such as network access control, wireless analytics, and troubleshooting.
NEW QUESTION # 12
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 58 Egress-VLAN-Name
- C. 65 Tunnel-Medium-Type
- D. 64 Tunnel-Type
- E. 81 Tunnel-Private-Group-ID
Answer: C,D,E
Explanation:
Explanation
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 13
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Site survey phase
- B. Project information phase
- C. Installation phase
- D. Hardware selection phase
Answer: A,B
Explanation:
Explanation
According to the web search results, the project information phase and the site survey phase are part of the process to plan a wireless design project. The project information phase involves defining the project scope, objectives, requirements, deliverables, and stakeholders. It also includes creating a project plan, a risk management plan, a communication plan, and a budget.1 The site survey phase involves conducting a physical inspection of the site where the wireless network will be deployed, measuring the signal strength and interference levels, identifying the optimal locations for the access points and antennas, and validating the network performance and coverage.2 The hardware selection phase and the installation phase are not part of the planning process, but rather part of the implementation process. The hardware selection phase involves choosing the appropriate wireless devices, such as access points, routers, switches, controllers, and cables, based on the network design and specifications.3 The installation phase involves installing, configuring, testing, and documenting the wireless network components according to the project plan and best practices.3 References: Wireless Device Network Planning and Design - Emerson, Telecommunications and Implementation Project Management - BICSI, Project Planning | Wireless Design Services | Digi International
NEW QUESTION # 14
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user movements
- D. Provides real-time insight into user online activity
Answer: A
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 15
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user purchase activity
- B. Provides real-time insight into user online activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
Answer: D
Explanation:
Explanation
(Page 88 Study Guide) "FortiPresence provides data and analytics based on demographic segmentation and visitor movement between areas" According to the web search results, FortiPresence location map functionality provides real-time insight into user movements. It uses the location data from the Fortinet access points to detect each visitor's smartphone Wi-Fi signal and track their location and behavior within the site. It also provides data visualization in a customizable format, such as heat maps and animated flows, to show the visitor traffic and movement patterns.
This geographical data analysis can help improve visitor experiences and business outcomes.
References: Location Analytics | FortiPresence 22.4.0 - Fortinet Documentation, FortiPresence Data Sheet
NEW QUESTION # 16
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Enterprise
- C. WPA3 Enterprise
- D. WPA2 Personal and radius MAC filtering
Answer: D
NEW QUESTION # 17
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user purchase activity
- B. Provides real-time insight into user online activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
Answer: D
Explanation:
Explanation
(Page 88 Study Guide) "FortiPresence provides data and analytics based on demographic segmentation and visitor movement between areas" According to the web search results, FortiPresence location map functionality provides real-time insight into user movements. It uses the location data from the Fortinet access points to detect each visitor's smartphone Wi-Fi signal and track their location and behavior within the site. It also provides data visualization in a customizable format, such as heat maps and animated flows, to show the visitor traffic and movement patterns.
This geographical data analysis can help improve visitor experiences and business outcomes.
References: Location Analytics | FortiPresence 22.4.0 - Fortinet Documentation, FortiPresence Data Sheet
NEW QUESTION # 18
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Two wireless APs must be sending data
- B. SQL services must be running
- C. Wireless network security must be set to open
- D. DTLS encryption on wireless traffic must be turned off
Answer: B
Explanation:
Explanation
https://docs.fortinet.com/document/fortipresence-vm/1.2.0/administration-guide/546812/introduction
NEW QUESTION # 19
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Site survey phase
- B. Project information phase
- C. Installation phase
- D. Hardware selection phase
Answer: A,B
NEW QUESTION # 20
What type of design model does FortiPlanner use in wireless design project?
- A. Architectural model
- B. Analytical model
- C. Predictive model
- D. Integration model
Answer: C
NEW QUESTION # 21
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- C. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- D. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
Answer: D
Explanation:
Explanation
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION # 22
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- B. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- C. Areas with the signal strength weaker than -68 dB are cut out of the map
- D. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
Answer: B
NEW QUESTION # 23
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that cannot be used because of regulatory channel restrictions
- B. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: C
NEW QUESTION # 24
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: A,B
Explanation:
Explanation
According to the web search results, Auto TX Power control is a feature that allows the AP to automatically adjust its transmission power based on the RF environment. The goal is to minimize interference and optimize coverage cells for roaming. When the AP detects any other wireless signal stronger than -70 dBm, it means that there is a potential source of interference nearby, so it will reduce its transmission power until it reaches the minimum configured TX power limit. This will reduce the interference and improve coexistence with other devices. When the AP detects any interference from a trusted neighboring AP stronger than -70 dBm, it means that there is a high density of APs in the area, so it will also reduce its transmission power until it reaches the minimum configured TX power limit. This will balance the load and avoid overlapping coverage areas.
References: AP Transmit Power and Enable Power Reduction with Auto TX, Transmit Power and Antenna Configuration, Meraki Auto RF: Wi-Fi Channel and Power Management
NEW QUESTION # 25
What type of design model does FortiPlanner use in wireless design project?
- A. Analytical model
- B. Architectural model
- C. Integration model
- D. Predictive model
Answer: B
Explanation:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
NEW QUESTION # 26
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- C. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- D. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
Answer: D
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION # 27
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create wireless LAN specific policies
- B. Preauthorize APs
- C. Create a custom AP profile
- D. Set the wireless controller country setting
Answer: D
Explanation:
Explanation
Setting the wireless controller country setting is a standard best practice that should be performed before configuring FortiAPs using a FortiGate wireless controller. The country setting determines the regulatory domain and the allowed channels and power levels for the wireless network. The country setting must match the physical location of the FortiAPs to comply with local regulations and avoid interference issues.
References: Secure Wireless LAN Course Description, page 5; FortiOS 6.4.0 Handbook - Wireless Controller, page 24.
NEW QUESTION # 28
......
Download Free Fortinet NSE6_FWF-6.4 Real Exam Questions: https://www.actualvce.com/Fortinet/NSE6_FWF-6.4-valid-vce-dumps.html
NSE6_FWF-6.4 Exam Dumps, NSE6_FWF-6.4 Practice Test Questions: https://drive.google.com/open?id=1Y-a-ug8mZ8Ix09xAW-VWUZyucfCXyS1J