Steps Necessary To Pass The NSE6_FWF-6.4 Exam from Training Expert ActualVCE
Valid Way To Pass NSE 6 Network Security Specialist's NSE6_FWF-6.4 Exam
NEW QUESTION 14
What type of design model does FortiPlanner use in wireless design project?
- A. Analytical model
- B. Integration model
- C. Architectural model
- D. Predictive model
Answer: D
NEW QUESTION 15
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create a custom AP profile
- B. Preauthorize APs
- C. Set the wireless controller country setting
- D. Create wireless LAN specific policies
Answer: A
NEW QUESTION 16
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. A dedicated radio configured for background scanning can support the connection of wireless clients
- D. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
Answer: B,C
Explanation:
To enable rogue AP scanning
NEW QUESTION 17
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Multicast
- B. DHCP
- C. Broadcast
- D. Static
Answer: D
NEW QUESTION 18
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Upstream link rate, the connection rate for the client to the AP
- C. The receive signal strength (RSS) of the client at the AP
- D. Downstream link rate, the connection rate for the AP to the client
Answer: C
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION 19
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiAP Cloud
- B. FortiGate
- C. FortiSwitch
- D. AP Manager
Answer: A,B
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 20
Which statement is correct about security profiles on FortiAP devices?
- A. Disable DTLS on FortiAP
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- C. Only bridge mode SSIDs can apply the security profiles
- D. FortiGate performs inspection the wireless traffic
Answer: C
NEW QUESTION 21
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- B. A WPA2 or WPA3 personal wireless network
- C. An X.509 certificate to authenticate the client
- D. An X.509 to authenticate the authentication server
- E. A WPA2 or WPA3 Enterprise wireless network
Answer: C,D
NEW QUESTION 22
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- B. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- C. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- D. Areas with the signal strength weaker than -68 dB are cut out of the map
Answer: B
NEW QUESTION 23
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that can be used only when Radio Resource Provisioning is enabled
Answer: D
NEW QUESTION 24
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured to authenticate locally on FortiGate
- B. A VAP configured to authenticate using a radius server
- C. A VAP configured for captive portal authentication
- D. A VAP configured for WPA2 or 3 Enterprise
Answer: B,D
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 25
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the WiFi Client monitor
- B. On the AP CLI, using the cw_diag ksta command
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the controller CLI, using the diag wireless-controller wlac -d sta command
Answer: B
NEW QUESTION 26
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Social networks authentication
- B. Short message service authentication
- C. Hardware security token authentication
- D. Software security token authentication
Answer: A,B
NEW QUESTION 27
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Security channels
- B. FortLink channels
- C. Data channels
- D. Control channels
Answer: C,D
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION 28
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. A WPA2 or WPA3 Enterprise wireless network
- C. An X.509 certificate to authenticate the client
- D. An X.509 to authenticate the authentication server
Answer: B,D
NEW QUESTION 29
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. The receive signal strength (RSS) of the client at the AP
- C. Upstream link rate, the connection rate for the client to the AP
- D. Downstream link rate, the connection rate for the AP to the client
Answer: C
NEW QUESTION 30
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Wireless network security must be set to open
- B. SQL services must be running
- C. DTLS encryption on wireless traffic must be turned off
- D. Two wireless APs must be sending data
Answer: B
NEW QUESTION 31
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Enterprise
- B. WPA3 Enterprise
- C. WPA2 Personal and radius MAC filtering
- D. Open, with radius MAC filtering
Answer: C
NEW QUESTION 32
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- C. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- D. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
Answer: B
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION 33
......
All NSE6_FWF-6.4 Dumps and Fortinet NSE 6 - Secure Wireless LAN 6.4 Training Courses: https://www.actualvce.com/Fortinet/NSE6_FWF-6.4-valid-vce-dumps.html
Free Test Engine For Fortinet NSE 6 - Secure Wireless LAN 6.4 Certification Exams: https://drive.google.com/open?id=1Y-a-ug8mZ8Ix09xAW-VWUZyucfCXyS1J