Best Preparations of 201 Exam 2024 F5 Networks Certification Study Materials Unlimited 255 Questions
Focus on 201 All-in-One Exam Guide For Quick Preparation.
NEW QUESTION # 13
In the BIG-IP Configuration Utility, a user requests a single screen view to determine the status of all Virtual Servers and associated pool members, as well as any iRules in use. Where should the BIG-IP Administrator instruct the user to find this view?
- A. Local Traffic > Virtual Servers
- B. Local Traffic > Network Map
- C. Local Traffic > Monitors
- D. Statistics
Answer: B
Explanation:
Explanation
Network Map can display vs and its associated pool, pool member, and irule, can be retrieved, and can be quickly linked.
NEW QUESTION # 14
The BIG-IP Administrator generates QKView using tmsh command "qkview -SO". In which directory does the BIG-IP appliance save the QKView?
- A. /etc/tmp
- B. /var /tmp/qkview
- C. /shared/qkview
- D. /var/tmp
Answer: D
NEW QUESTION # 15
Where is persistence mirroring configured?
- A. It is part of a pool definition.
- B. It is part of a virtual server definition.
- C. It is always enabled.
- D. It is part of a profile definition.
Answer: D
NEW QUESTION # 16
To increase available bandwidth of an existing Trunk, the BIG-IP Administrator is adding additional interfaces.
Which command should the BIG-IP Administrator run from within bosh shell?
- A. tmsh create /net trunk trunk_A interfaces add {1.3.1.4}
- B. tmsh create/sys trunk trunk_A interfaces add {1.3.1.4}
- C. tmsh modify /net trunk trunk_A interfaces add {1.3.1.4}
- D. tmsh modify/sys trunk trunk^A interfaces add {1.3.1.4}
Answer: C
NEW QUESTION # 17
A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP based monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes.
All other settings are default. What is the status of the monitor is working in all cases?
- A. All pool members are down since the ICMPbased monitor is failing in some cases.
- B. The pool members whose nodes are failing the ICMPbased monitor will be marked unavailable.
- C. All pool members are up since the HTTPbased monitor is successful.
- D. The pool members whose nodes are failing the ICMPbased monitor will be marked disabled.
Answer: B
NEW QUESTION # 18
The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B. Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection?
- A. 10.10.20.4:80
- B. 10.10.20.2:80
- C. 10.10.20.1:80
- D. 10.10.20.5:80
- E. 10.10.20.3:80
Answer: C
NEW QUESTION # 19
Which statement is true regarding failElover.
- A. Hardware failElover can be used in conjunction with network failover.
- B. If the hardware failElover cable is disconnected, both BIGElIP devices will always assume the active role.
- C. By default, hardware faElilover detects voltage across the failElover cable and monitors traffic across the internal VLAN.
- D. Hardware failElover is disabled by default.
Answer: A
NEW QUESTION # 20
Which must be sent to the license server to generate a new license?
- A. the system's dossier
- B. the system's base license
- C. the system's purchase order number
- D. the system's host name
Answer: A
NEW QUESTION # 21
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. tracepath 10.10.3.75:8080 GET /index
- B. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
- C. curl-header 'Host:www.example.com' http://10.10.3.75:8080/
- D. tracepath 'http://www.example.com:80
Answer: C
NEW QUESTION # 22
A BIG-IP Administrator needs to purchase new licenses for a BIG-IP appliance.
The administrator needs to know if a module is licensed and the memory requirement for that module.
Where should the administrator view this information in the System menu?
- A. Configuration > Device
- B. Configuration >OVSDB
- C. Resource Provisioning
- D. Software Management
Answer: C
NEW QUESTION # 23
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?
- A. The BIG-IP Administrator is logged in as root
- B. The BIG-IP Administrator is logged in as administrator
- C. The BIG-IP Administrator is NOT logged into command line to tail over
- D. The BIG-IP Administrator is on the Standby Device
Answer: D
NEW QUESTION # 24
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B
NEW QUESTION # 25
Assume the bigd daemon fails on the active system. Which three are possible results? (Choose three.)
- A. The active system will failover and the standby system will go into active mode.
- B. The active system will restart the tmm daemon and continue in active mode.
- C. The active system will reboot and the standby system will go into active mode.
- D. The active system will restart the bigd daemon and continue in active mode.
- E. The active system will continue in active mode but gather member and node state information from the standby system.
Answer: A,C,D
NEW QUESTION # 26
You have created a custom profile named TEST2. The parent profile of TEST2 is named TEST1. If additional changes are made to TEST1, what is the effect on TEST2?
- A. When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2.
- B. Some of the changes to TEST1 may propagate to TEST2.
- C. All changes to TEST1 are propagated to TEST2.
- D. Changes to TEST1 cannot affect TEST2 once TEST2 is saved.
Answer: B
NEW QUESTION # 27
Refer to the exhibit.
Why is the virtual server responsive to incoming connections?
- A. The node monitor failed
- B. The node is disabled.
- C. The pool member monitor failed
- D. The pool member is disabled
Answer: C
NEW QUESTION # 28
Assuming there are open connections through an active system's NAT and a fail over occurs, by default, what happens to those connections?
- A. Longlived connections such as Telnet and FTP will be maintained while shortlived connections such as HTTP will be lost.
- B. All open connections will be maintained.
- C. All open connections are lost, but new connections are initiated by the newly active BIG IP, resulting in minimal client downtime.
- D. The "Mirror" option must be chosen on the NAT and the setting synchronized prior to the connection establishment.
- E. All open connections will be lost.
Answer: B
NEW QUESTION # 29
New Syslog servers have been deployed in an organization. The BIG-IP Administrator must reconfigure the BIG-IP system to send log messages to these servers.
In which location in the Configuration Utility can the BIG-IP Administrator make the needed configuration changes to accomplish this?
- A. System > Logs > Configuration
- B. System > Configuration > Local Traffic
- C. System > Configuration > Device
- D. System > Logs > Audit
Answer: A
NEW QUESTION # 30
A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIG-IP, what will occur to the IP addresses?
- A. Traffic initiated by the pool members will have the source address translated to a self-IP address but the destination address will not be changed.
- B. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address.
- C. Traffic initiated by selected clients, based on their IP address, will have the source address translated to a self-IP address but the destination will only be translated if the traffic is destined to the virtual server.
- D. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address. Traffic arriving destined to other destinations will have the source translated to a self-IP address only.
Answer: B
NEW QUESTION # 31
Which IP address will the client address be changed to when SNAT automap is specified within a Virtual Server configuration.
- A. The floating self IP address on the VLAN where the packet arrives on the system.
- B. It will alternate between the floating and noEl nfloating self IP address on the VLAN where the packet leaves the system so that port exhaustion is avoided.
- C. The floating self IP address on the VLAN where the packet leaves the system.
- D. It will alternate between the floating and noElfnloating self IP address on the VLAN where the packet arrives on the system so that port exhaustion is avoided.
Answer: C
NEW QUESTION # 32
When configuring a pool member's monitor, which three association options are available. (Choose three.)
- A. inherit the node's monitor
- B. do not assign any monitor to the specific member
- C. inherit the pool's monitor
- D. assign a monitor to the specific member
- E. configure a default monitor
Answer: B,C,D
NEW QUESTION # 33
When initially configuring the BIG-IP system using the config utility, which two parameters can be set? (Choose two.)
- A. the netmask of the host via the management port
- B. the netmask of the SCCP
- C. the IP address of the host via the management port
- D. the IP address of the SCCP
- E. the port lockdown settings for the SCCP
- F. the port lockdown settings for the host via the management port
Answer: A,C
NEW QUESTION # 34
A BIG-IP Administrator needs to restore a UCS file to an F5 device using the Configuration Utility. Which section of the Configuration Utility should the BIG-IP Administrator access to perform this task?
- A. Local Traffic > Virtual Servers
- B. System > Archives
- C. Local Traffic > Policies
- D. System > Configuration
Answer: B
NEW QUESTION # 35
Which Virtual Server type prevents the use of a default pool?
- A. Performance (Layer 4)
- B. Standard
- C. Forwarding (IP)
- D. Performance HTTP
Answer: C
Explanation:
Forwarding (IP) cannot be associated with the pool.
NEW QUESTION # 36
......
Guaranteed Success with 201 Dumps: https://www.actualvce.com/F5/201-valid-vce-dumps.html
Pass F5 201 Exam – Experts Are Here To Help You: https://drive.google.com/open?id=1cjnEZUsaKe8xGGwqMCNDyuet_te4UTOP