Pass Your Next 201 Certification Exam Easily & Hassle Free
Free F5 201 Exam Question Practice Exams
Understanding of functional and technical aspects of Troubleshooting basic hardware issues
The following will be discussed in this section:
- Given a log file, determine the nature of a hardware issue
- How to reboot an F5 platform into the EUD
- How to interpret the output from an EUD and determine if the test passed or failed
- How to correlate the LCD message to message in the corresponding log file
- Understand the relationship between interfaces, trunks, VLANs and their status/statistics
- Given a possible issue, determine which log file entries to review
- How to download output from the unit an EUD was run on
- How to locate the LCD on an F5 Platform
F5 201 (BIG-IP Administrator) Certification Exam is a highly recognized and respected certification in the technology industry. BIG-IP Administrator Exam certification is designed for IT professionals who are responsible for managing and maintaining F5 BIG-IP products. BIG-IP Administrator Exam certification exam validates the knowledge and skills required to effectively deploy, configure, and manage F5 BIG-IP products in complex network environments. 201 exam covers a variety of topics, including network fundamentals, application delivery, security, and troubleshooting.
NEW QUESTION # 97
Which IP address will the client address be changed to when SNAT automap is specified within a Virtual Server configuration.
- A. It will alternate between the floating and noElfnloating self IP address on the VLAN where the packet arrives on the system so that port exhaustion is avoided.
- B. The floating self IP address on the VLAN where the packet leaves the system.
- C. The floating self IP address on the VLAN where the packet arrives on the system.
- D. It will alternate between the floating and noEl nfloating self IP address on the VLAN where the packet leaves the system so that port exhaustion is avoided.
Answer: B
NEW QUESTION # 98
Assuming there are open connections through an active system's virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.
- A. All open connections are maintained.
- B. All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.
- C. LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost. - D. When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.
- E. All open connections are lost.
Answer: E
NEW QUESTION # 99
Refer to the exhibit.
Which two pool members should be chosen for a new connection? (Choose two.)
- A. 172.16.15.4.80
- B. 172.10.15.2.80
- C. 172.16.15.9.80
- D. 172.16.15.1.80
- E. 172.16.15.7.80
Answer: A,E
NEW QUESTION # 100
You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG IP supplied cookie.
Which four are profiles that would normally be included in the virtual server's definition? (Choose four.)
- A. ServerSSL
- B. ClientSSL
- C. TCP
- D. CookieBased Persistence
- E. HTTPS
- F. HTTP
Answer: B,C,D,F
NEW QUESTION # 101
A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B . Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.
- A. 172.16.20.5:80
- B. 172.16.20.2:80
- C. 172.16.20.1:80
- D. 172.16.20.3:80
- E. 172.16.20.4:80
Answer: E
NEW QUESTION # 102
A BIG-IP Administrator remotely connects to the appliance via out-of-band management using https://mybigip mycompany net. The management portal has been working all week. When the administrator attempts to login today, the connection times out. Which two aspects should the administrator verify? (Choose two)
- A. Packet Filters on the device are blocking port 80.
- B. DNS is property resolving the FQDN of the device.
- C. The administrator has the latest version of the web browser.
- D. The administrator has TCP connectivity to the device.
- E. The device is NOT redirecting them to http.
Answer: B,D
NEW QUESTION # 103
A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client's IP address, but on the virtual servers their packets arrive on. What could best accomplish this goal.
- A. The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.
- B. Some virtual servers could be associated with SNAT pools and others not associated with SNAT pools.
- C. The decision to perform source address translation is always based on a client's address (or network). Thus, this goal cannot be achieved.
- D. A SNAT for all addresses could
be defined,
and then disable the SNAT processing for select VLANs.
Answer: B
NEW QUESTION # 104
An application is configured so that the same pool member must be used for an entire session, as well as for HTTP and FTP traffic.
A user reports that a session has terminated, and the user must restart the session. The BIG-IP Administrator determines that the active BIG-IP device failed over to the standby BIG-IP device. Which configuration settings should the BIG-IP Administrator verify to ensure proper behaviour when BIG-IP failover occurs?
- A. Persistence mirroring and Match Across Services
- B. Stateful failover and Network Failover detection
- C. syn-cookie insertion threshold and connection low-water mark
- D. cookie persistence and session timeout
Answer: A
NEW QUESTION # 105
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual
server processing takes place. Also assume that the NAT definition specifies a
NAT address and an origin address while all other settings are left at their defaults.
If the origin server were to initiate traffic via the BIGElIP, what changes, if any,
would take place when the BIGElIP processes such packets.
- A. The source address would be changed to the NAT address and destination address would be left unchanged.
- B. The BIGElIP would drop the re quest since the traffic didn arrive destined to the NAT address.The BIGElIP would drop the request since the traffic didn. arrive destined to the NAT address.
- C. The source address would not change, but the destination address would be changed to the NAT address.
- D. The source address would not change, but the destination address would be changed to a seEllIfP of the BIGElIP.
Answer: A
NEW QUESTION # 106
When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP". Which address is this?
- A. an address on the current system used to initiate mirroring and network failover heartbeat messages
- B. an address of the other system in a redundant pair configuration
- C. an address of the other system in its management network
- D. an address on the current system used to listen for failover messages from the partner BIG-IP
Answer: B
NEW QUESTION # 107
A site needs to terminate client HTTPS traffic at the BEl II GP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server. (Choose two.)
- A. ServerSSL
- B. ClientSSL
- C. TCP
- D. HTTP
- E. HTTPS
Answer: B,C
NEW QUESTION # 108
Which two statements
describe differences
between the active and standby systems. (Choose two.)
- A. Floating selfElIP addresses are hosted only by the active system.
- B. FailElover triggers only cause changes on the active system.
- C. Virtual server addresses are hosted only by the active system.
- D. Configuration changes can only be made on the active system.
- E. Monitors are performed only by the active system.
Answer: A,C
NEW QUESTION # 109
In the BIG-IP Configuration Utility, a user requests a single screen view to determine the status of all Virtual Servers and associated pool members, as well as any iRules in use. Where should the BIG-IP Administrator instruct the user to find this view?
- A. Local Traffic > Monitors
- B. Statistics
- C. Local Traffic > Virtual Servers
- D. Local Traffic > Network Map
Answer: D
Explanation:
Explanation
Network Map can display vs and its associated pool, pool member, and irule, can be retrieved, and can be quickly linked.
NEW QUESTION # 110
You need to terminate client SSL traffic at the BIGElIP and also to persist client traffic to the same pool member based on a BIGElIP supplied cookie. Which four are profiles that would normally be included in the virtual server's definition. (Choose four.)
- A. ServerSSL
- B. ClientSSL
- C. TCP
- D. HTTPS
- E. HTTP
- F. CookieElBased Persistence
Answer: B,C,E,F
NEW QUESTION # 111
A local user account (Users) on the BIG-IP device is assigned the User Manager role. Userl attempts to modify the properties of another account (User2), but the action fails. The BIG-IP Administrator can successfully modify the User2 account.
Assuming the principle of least privilege, what is the correct way to allow User 1 to modify User2 properties?
- A. Grant User1 administrative privileges
- B. Modify the partition access for User 1
- C. Move User2 to the same partition as User1
- D. Move User to the same partition as User2.
Answer: B
NEW QUESTION # 112
......
F5 201: BIG-IP Administrator exam is a challenging certification program that requires candidates to have a strong understanding of F5 BIG-IP administration. Candidates should have hands-on experience in deploying, configuring, and managing BIG-IP devices and solutions. They should also have a good understanding of network traffic management, application delivery, and security concepts. Candidates who successfully pass the exam will earn the F5 BIG-IP Administrator certification, which is a valuable credential for network administrators.
Ace 201 Certification with 255 Actual Questions: https://www.actualvce.com/F5/201-valid-vce-dumps.html
PASS F5 201 EXAM WITH UPDATED DUMPS: https://drive.google.com/open?id=1rN8EgW3yHr8MPwZZMUK_XbQQ7nLzWIKK