View All HPE0-S60 Actual Free Exam Questions Nov 08, 2023 Updated
Pass Authentic HP HPE0-S60 with Free Practice Tests and Exam Dumps
HPE0-S60 exam is a delta exam, meaning that it focuses on the latest updates and advancements in HPE compute solutions. It covers a range of topics, including HPE compute architecture, management, and security, as well as HPE compute solutions for virtualization, cloud, and big data. Passing the HPE0-S60 exam demonstrates that an IT professional has the knowledge and skills needed to design, deploy, and manage HPE compute solutions in complex enterprise environments.
NEW QUESTION # 30
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Storm control
- B. sFlow
- C. Port flap protection
- D. Pause flood protection
Answer: B
NEW QUESTION # 31
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- B. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- C. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- D. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
Answer: A
NEW QUESTION # 32
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?
- A. The customer must create at least five logical enclosures for this setup.
- B. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
- C. To manage 15 frames, additional HPE Composers are required.
- D. If properly cabled, any compute node can access any HPE D3490 storage module
Answer: A
NEW QUESTION # 33
Which statement about HPE Superdome nPars is true?
- A. Chassis in the same nPar can have different CPU configuration
- B. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
- C. Rack Management Controller is required Tor nPar configuration
- D. Chassis in the same nPar can have different memory configuration
Answer: C
NEW QUESTION # 34
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 35
Which compute node parameters are captured within server hardware type?
- A. installed operating system
- B. Mezzanine card configuration
- C. Number of the CPUs
- D. Size of the memory Installed
Answer: A
NEW QUESTION # 36
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. For the given downlink speed, the maximum number of frames is reached
- C. To use interconnect bay set 3, all compute nodes must be half-height
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
NEW QUESTION # 37
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- B. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- C. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- D. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- E. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- F. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
Answer: B,D
NEW QUESTION # 38
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. HPE Synergy 12 Gb SAS Connection Module
- B. HPE virtual Connect SE 32 Gb FC Module for Synergy
- C. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
- D. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
Answer: C
NEW QUESTION # 39
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using array management tools
- B. Disable deduplication for this volume at the array level
- C. Remove the offline disks using Windows Disk Management
- D. Install and configure MPIO on me Windows system
Answer: D
NEW QUESTION # 40
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models are based on AMD CPUs
- B. All new HPE SimpliVity models support deduplication and compression
- C. New HPE SimpliVity deployments are licensed per node not per physical socket
- D. New HPE SimpliVity deployments give customer flexible choice of hypervisor
Answer: B
NEW QUESTION # 41
Which statement about login redistribution is true?
- A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- B. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
- C. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- D. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
Answer: D
NEW QUESTION # 42
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. For the given downlink speed, the maximum number of frames is reached
- C. To use interconnect bay set 3, all compute nodes must be half-height
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
NEW QUESTION # 43
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- D. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
Answer: A
NEW QUESTION # 44
Which statement about an HPE Oneview support dump is true?
- A. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- B. Support dump is a binary file that can be opened only in a dedicated application
- C. Appliance support dump by default contains a logical enclosure support dump
- D. Preview support dump is available only when creating an appliance support dump
Answer: B
NEW QUESTION # 45
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)
- A. Re-parent an existing enclosure group to the new logical interconnect group.
- B. Modify an existing logical interconnect to include second HPE Synergy frame.
- C. Move one of the master modules to the appropriate interconnect bay in the second frame.
- D. Create a new logical interconnect group and enclosure group for two frames setup
- E. Create a new logical enclosure based on both HPE Synergy frames.
Answer: B,E
NEW QUESTION # 46
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
NEW QUESTION # 47
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?
- A. To manage HPE Primera using HPE OneView. a dedicated license is required
- B. HPE OneView offers additional functionalities for HPE Primera like CPG management
- C. HPE OneView offers limited support tor HPE Primera because of the firmware differences
- D. Management procedures and features are the same tor both types of the array
Answer: B
NEW QUESTION # 48
After HPE Superdome Flex deployment and nPar setup, you need to verify health status of HPE Superdome Flex components.
Put the steps on the left into the coned order on the right to perform this task.
Answer:
Explanation:
NEW QUESTION # 49
What is a limitation when creating a server profile?
- A. Administrator cannot define more than 8 connections within a server profile
- B. It is not possible to create shared volumes on demand through a server profile
- C. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- D. ILO management is limited to the integration with Active Directory or LDAP
Answer: D
NEW QUESTION # 50
......
HP HPE0-S60 (Delta - HPE Compute Solutions) certification exam is a valuable certification for IT professionals who work with HPE compute solutions. By earning this certification, candidates can demonstrate their expertise in the field and enhance their career prospects.
New HPE0-S60 Exam Questions Real HP Dumps: https://www.actualvce.com/HP/HPE0-S60-valid-vce-dumps.html
Course 2023 HPE0-S60 Test Prep Training Practice Exam Download: https://drive.google.com/open?id=1TXDiyolWFrvuHUo1VcnlMPPiBol9h9Zk